1)  vacuum unit
真空元件
2)  vacuum
真空
1.
Study on regeneration of ethanol-loaded activated carbon by microwave irradiation under vacuum condition;
载乙醇活性炭真空微波解吸实验研究
2.
The research of far-infrared drying of carrot under vacuum conditions;
胡萝卜远红外真空干燥试验参数的研究
3.
Effects of overlap steps on oxygen production by vacuum pressure swing adsorption;
重叠步骤对真空变压吸附制氧性能的影响
3)  vaccum
真空
1.
The influence factors on the polyester polycondensation vaccum system and their treatment;
影响聚酯缩聚真空的因素及处理
2.
Different type of vaccum pump and its combination used in existing polyester plant were introduced,also the economic analysis was done.
介绍已有的聚酯装置中所使用的不同形式的真空泵及组合 ,并对其进行经济分析。
3.
Introduced are four displacing methods, namely complete mixing, non-mixing, vaccum deaeration, and pressure displacement.
介绍了常用的四种置换方法,即完全混合置换、无混合置换、真空置换和加压置换。
4)  vacuum brazing
真空钎焊
1.
The craft and application of vacuum brazing for honeycomb material;
蜂窝材料的真空钎焊工艺及应用
2.
Influence of active element Mg on joint properties of aluminum alloy vacuum brazing;
活性元素镁对铝合金真空钎焊接头性能的影响
3.
Morphology of carbide on diamond interface by vacuum brazing;
真空钎焊金刚石界面碳化物的形貌
5)  vacuum distillation
真空蒸馏
1.
Industrial experiment on recovering metals from waste zinc-tin alloy by vacuum distillation;
真空蒸馏法从废杂锌锡合金中回收金属的工业试验
2.
Cadmium recovery process and modeling in the Ni-Cd batteries by vacuum distillation;
真空蒸馏回收镍镉电池中镉金属工艺优化模型研究
3.
Purification of γ-irradiated 30 % TRPO-ke rosene by vacuum distillation;
真空蒸馏净化辐照后的TRPO煤油体系
6)  vacuum frying
真空油炸
1.
The best processing technology of crispy sweet potato by the method of vacuum frying;
真空油炸甘薯脆片的研究
2.
The manuscript studied the effects of color preservation technology on quality of vacuum fried potato chips by using pretreatment technology before vacuum frying.
采用真空油炸前预处理技术研究了护色工艺对真空油炸马铃薯片品质的影响。
3.
Effects of two pretreatment, combined with vacuum frying on the moisture content, fat content and color value of fried green soy bean were studied.
研究了2种预处理工艺结合真空油炸对毛豆水分质量分数、脂肪质量分数和色差的影响。
参考词条
补充资料:Ccd感光元件

ccd传感器又叫电荷耦合器,它是一种特殊的半导体材料,由大量独立的感光二极管组成,一般按照矩阵形式排列。目前,ccd的种类有很多,其中面阵型ccd是主要应用在数码相机中。它是由许多单个感光二极管组成的阵列,整体呈正方形,然后像砌砖一样将这些感光二极管砌成阵列来组成可以输出一定解析度图像的ccd传感器。从功能上来说,ccd感光元件在某种程度的相当于传统相机的胶卷。从消费者选择的角度来说,ccd感光元件当然是越大越好。

相信很多消费者在国货品牌中看到过coms这个名词的,其实它也是一种感光元件,只不过在成本上要明显低于ccd,在功耗方面也小于ccd,但在噪点的控制和成像质量方面不如ccd(这里只是指尺寸比较小的cmos感光元件),所以只在低端数码相机以及摄像头设计上普遍使用。

另外,关于superccd,它是富士独创的一项ccd技术,它与普通型ccd最大的不同在于,它改变了矩阵ccd四个原色点合成一个象素点的原理,八边形几何构造和间断排列,使蜂窝状的感光单元能更好的利用了ccd表面空间,在象素相等的情况下获得了更多的信息量。目前几乎全线富市产品都采用了这一感光元件,而且反映明显比以前要好,特别是高达1600的iso感光度设计,博得消费者一致好评。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。