2) axial deviation
轴线偏差
1.
The relation between supporting load of rotary kiln and axial deviation is worked out with the help of regression analysis,which will be the basis for mastering the operation of rotary kiln.
通过将筒体轴线偏差转化为回转窑支承载荷分配中的给定位移,灵活地计入了轴线偏差对支承载荷分配的影响。
3) axial alignment tolerance
轴向偏差
1.
Research results indicate that when the single ball lens is used in the LD-ball lens-SMF system,the axial alignment tolerance is ±30 μm,the lateral alignment tolerance is ±1.
结果表明:当采用单球透镜时,所带来的轴向偏差为±30μm,横向偏差为±1。
4) lateral displacement
离轴偏差
1.
The effect of GRIN lend misalignment,end separation,lateral displacement and angular misalignment on coupling efficiency of optical signal transmitting system is tested and investigated by coupling between the GRIN lens and detector.
通过自聚焦透镜和光电探测器耦合系统,研究、测试了自聚焦透镜装配引起的轴向距离、角度偏差和离轴偏差对信号传输系统耦合效率的影响。
5) axle load difference
轴载偏差
1.
The effect of axle load difference on pavement life;
车辆轴载偏差对路面使用寿命的影响
6) optics axis error
光轴偏差
1.
Effect on the range ability of laser range finder by optics axis error;
光轴偏差对激光测距机测距能力的影响
补充资料：动作轴线
在电影的场面调度中，处理人物和动作及相互交流时遵循的方向线。它是使人物行为符合逻辑、画面构图合理的保证。违反动作轴线的规律就会破坏空间的统一感，使观众无法理解人物的行为目的和人物动作发生的地方及运动方向。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条