说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 电气从动工具
1)  electro driven tools
电气从动工具
2)  Pneumatic and electric tools
电气动工具
3)  pneumatic tool
气动工具
1.
With the development of market economy, electromechanical product including pneumatic tool has been greatly impacted, especially after China’s joining WTO.
随着市场经济的发展,尤其是中国加入 WTO 组织以后,机电产品受到极大的冲击,气动工具也不例外。
4)  electric power tool
电气工具
5)  electric tools
电动工具
1.
Research on rapid-charge type Ni-MH battery for electric tools application;
电动工具用高速充电型MH-Ni蓄电池的研制
2.
The esthetics characters of electric tools sculpting and human esthetics taste were combined by fuzzy theory to comprehensively evaluate electric tools sculpting.
利用模糊理论将电动工具造型的美学特征与人们的主观审美认识结合起来,对电动工具造型进行了综合分析评价。
3.
Based on relevant theory of modular design,the paper studied modular design process of electric tools,particularly on three aspects such as module partition,modular establishment and developing of module management system based on UG.
本文依据模块化设计相关理论,对电动工具产品的模块化设计过程进行了研究,着重从模块划分、模块创建以及基于UG平台的模块管理开发3个方面进行了详细探讨,在此基础上,开发了电动工具模块化设计原形试验系统。
6)  electric tool
电动工具
1.
Based on the study of implement mechanism of electric reciprocating saw,a kinematic and dynamic model was established,the picture of electric tool′s motion framework with reciprocating lever inextenso were made and the situation and design method of the motion framework which mentioned above were analysed,also the balance framework was improved by using ADAMS.
以往复杆式电动锯运动机构为研究对象,建立了运动学和动力学模型,完整地绘制了往复杆式电动工具运动机构简图,对往复杆式电动工具运动机构的状态及设计方法进行了相应的分析与计算,并用ADAM S软件对平衡机构进行了优化。
2.
<Abstrcat>This paper introduces the application of computer in electric tool automatic testing line.
介绍了计算机在电动工具检测线中的应用,阐述了系统的工作原理及工作过程,重点分析了计算机系统的软、硬件设计。
3.
In this paper, on the basis of finishing to study on the working circumstance simulation , a synthesis performance testing system to test electric tools working characteristic, temperature rising characteristic and four kinds of safety provisions was developed, in order to meet the strong need of test & measurement techniques from electric tools.
针对电动工具对检测技术的强烈需求 ,在完成工作环境模拟研究的基础上 ,研制了一种电动工具计算机辅助综合测试系统 ,文中介绍了其硬件与软件。
补充资料:气动工具
      用压缩气体作为动力的工具,又称风动工具。气动工具主要分为冲击式、旋转式和兼具冲击和旋转作用等型式。①冲击式气动工具:由压缩气体驱动活塞往复运动,产生高速锤击作用,完成所需动作。如锤击钎杆、拆除建筑物、破碎路面用的风镐,铆接金属结构用的铆钉枪,清除铸锻件毛刺用的风铲和除锈或捣固砂型用的风锤等。②旋转式气动工具:由压缩气体驱动叶片式气动马达带动工具旋转,完成所需动作。如风动磨头和抛光机,钻孔和扩孔用的高速风钻,拧螺母用的风动搬手和风动旋凿等。③冲击、旋转式气动工具:同时具有冲击和旋转两种动作。如采矿和掘进用的凿岩机,其缸体内的锤头向前移动时冲击钎杆尾端使钎头凿入岩石,回行时带动钎杆旋转一个角度,再开始第二次凿岩动作。④其他风动工具:如气动夹具,动作迅速,夹紧可靠,适用于自动生产线。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条