1) carbamide scraper
硬质合金刮刀
2) carbide skiving cutter
硬质合金刮削刀盘
3) Skiving carbide hob
硬质合金刮削滚刀
5) cemented carbide tool
硬质合金刀具
1.
The cemented carbide tool coated with diamond film is one of the important application of CVD diamond film.
金刚石薄膜涂层硬质合金刀具是CVD金刚石薄膜的重要应用领域之一。
2.
The Co concentration in the etching liquor after different acid corroding time for YG series cemented carbide tools was tested by atomic absorption spectrometry,the hardness change of tools was detected by HRC and the microstructure of diamond film was observed by scanning electron microscope.
采用原子吸收光谱(AAS)标准曲线法对YG系列硬质合金刀具酸蚀后浸蚀溶液中的Co浓度进行了定量测试;采用洛氏硬度(HRC)计跟踪测试了不同酸蚀时间后刀具硬度的变化;采用扫描电子显微镜(SEM)观察了硬质合金刀具酸蚀前后的组织变化及金刚石薄膜的组织形貌。
3.
Based on the high-speed milling experiment for titanium alloy Ti6Al4V with fine grain cemented carbide tool Y330,the tool wear and breakage modes and failure mechanisms were analyzed.
基于用Y330细晶粒硬质合金刀具高速铣削Ti6Al4V钛合金的试验,分析了刀具的损坏形态和失效机理。
6) cemented carbide
硬质合金刀具
1.
The diamond film was deposited on WC-6%Co(mass fraction) cemented carbide by DC arc discharged plasma chemical vapor deposition.
低压气相金刚石薄膜硬质合金刀具在直流弧光放电等离子体CVD镀膜设备上制备。
2.
The contrast dry cutting experiments are carried out to study the cutting performance of Ni based PM parts by using ceramic and cemented carbide cutting tools.
对陶瓷刀具和硬质合金刀具进行了镍基粉末冶金零件的干切削对比试验,测量了切削力和加工表面粗糙度,分析了刀具的磨损机理。
补充资料：盘硬
1.唐韩愈《荐士》诗:"横空盘硬语，妥帖力排奡。"后以"盘硬"指语句新奇，不落窠臼。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条