说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 极端间距
1)  distance between pole tips
极端间距
2)  distance between two terminations
端头间距
1.
By using float screen design, increasing the distance between two terminations, using surface trim made by ourselves to clean MLCC surface quietly ,it is concluded that surface electric arc of high voltage MLCC can be improved and the break down voltage can be increased obviously.
通过悬浮内电极排布、加大端头间距、使用自制专用表面整理剂对高压MLCC表面彻底清洁等工艺措施,对高压MLCC表面放电现象有很大改善,并显著提高了其耐电压性能。
3)  wingtip expansion
翼端间距
1.
The horizontal expansion of bottom otter trawl, especially the wingtip expansion, is one of the most important parameters affecting capture efficiency.
底层单拖网的翼端间距是影响拖网系统捕捞效率的重要技术参数。
4)  anode spacing
阳极间距
5)  space between electrodes
电极间距
1.
The experimental results show that the discharge current I decreases with increase of the needle radius a or the space between electrodes d,and increases with the increase of space between needles s.
实验得出放电电流I随针尖半径a和电极间距d的增大而减小,随相邻针尖间距s的增大而增大,但当s≥40 mm时,相邻针尖的相互作用已很小,I几乎不变;d对火花击穿电压的影响较大,a对其的影响较小。
6)  electrode spacing
电极间距
1.
The flashover properties of pure epoxy sample with different electrode spacing are studied.
仿真计算了相同电极间距d不同电极曲率半径r时指形电极系统的最大电场强度Emax;相同r不同d时指形电极系统的Emax;不同d、r时指形电极系统的场增强因子f。
补充资料:板间距
分子式:
CAS号:

性质:又称板间距。板式塔相邻两块塔板之间的距离。塔板间距直接影响塔的高度,并对适宜气速的确定发生重要影响。塔板间距的大小与塔的处理能力、操作弹性、塔板效率和塔径大小密切相关。对塔板数较多或安装在室内的塔,可考虑采用较小的塔板间距,适当增大塔径而降低塔高,若塔板数不多,则塔板间距较大而塔径较小的塔比较经济。当塔内各段负荷不同时,可考虑各板采用不同的塔板间距。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条