1) speed of reset
重定速度
2) velocity coincidence
速度重合
3) velocity remapping
速度重映
1.
Based on the velocity remapping strategy of the SALE algorithm,three methods are proposed to improve the accuracy and monotonicity of momentum flux calculation on a 1D staggered grid: the SUR method which employs the upwind-type slope and a repairing procedure;the SM method which employs a minmod slope limiter;and the SLR method which employs a new slope limiter and a repairing procedure.
在一维交错网格上基于SALE算法的速度重映策略,提出了3种动量通量的改进算法:①采用迎风斜率加修补的SUR方法;②采用minmod斜率限制器的SM方法和③采用一种新的斜率限制器加修补的SLR方法。
4) Velocity tomo graphy
速度重建
5) velocity of body gravity
重心速度
1.
At the gliding stage,LI Ling angel of thigh and ground is much big,the swing legs vertical speed too high,level speed too smell and the enlarging angel of body gravity; At the transitional stage,the transitional time is long,velocity of body gravity and shot gravity descend;The supporting point of LI Ling is prominent,speed-up effect is striking at the ending movement stage.
结论:李玲在起滑时蹬地角偏大,左腿摆动垂直分速过大,水平分速相对较小,重心腾起角增大;过渡步阶段单支撑时间过长,铅球速度和身体重心速度均呈现下降趋势;最后用力阶段主要加速点(用力点)较为突出,加速效果较显著。
2.
Conclusions: At the gliding stage, Cheng Xiao-yan the swing legs vertical speed too high, level speed too smell and the enlarging angel of body gravity ; At the transitional stage, transitional time is long, velocity of body gravity and shot gravity descend; The supporting point of Cheng Xiao-yan is prominent , speed up effect is striking at the ending movement stage.
结论:程晓燕在起滑时左腿摆动垂直分速过大,水平分速相对较小,重心腾起角增大;过渡步阶段单支撑时间过长,铅球速度和身体重心速度均呈现下降趋势;最后用力阶段主要加速点(用力点)较为突出,加速效果较显著。
6) velocity of remelting
重熔速度
补充资料：套刻重合
分子式：
CAS号：
性质：晶片上每一点定义的矢量，这是基片几何图形的矢量位置和套刻图形(可以由光致抗蚀剂组成)相应点矢量位置之间的差称作。= 。
CAS号：
性质：晶片上每一点定义的矢量，这是基片几何图形的矢量位置和套刻图形(可以由光致抗蚀剂组成)相应点矢量位置之间的差称作。= 。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条