1) herringbone gear pump
人字齿轮原
2) herringbone gear
人字齿轮
1.
Main causes and the analyses of the wrongly-connected axle of double-circular-arc herringbone gear reducer of beam pump;
抽油机双圆弧人字齿轮减速器串轴的主要原因与分析
2.
Analysis on static and dynamic characteristics of herringbone gear in meshing;
人字齿轮啮合静-动态振动特性分析
3.
Contacting element of tooth surface stress of herringbone gears;
人字齿轮齿面应力的接触元分析
3) herringbone gearing
人字齿轮
1.
Theoretical vibration pattern of herringbone gearing;
人字齿轮传动的振动理论分析模型
4) chevron gear
人字齿轮
1.
It is mainly research the chevron gear of ZY3NB-1300 drilling pump, and on the foundation of reference the advanced manufacture technique of home and abroad.
以ZY3NB-1300型钻井泵的人字齿轮为研究对象,在借鉴国内外先进制造技术的基础上,从齿轮加工机床、加工图样、刀具种类及应用范围、提高表面质量途径以及工装设计等方面进行了总体分析,确定了人字齿轮的加工难点及在Y31200B滚齿机上用指形齿轮铣刀铣齿的加工方案。
2.
The text is mainly research the chevron gear of ZY3NB-1300 drilling pump, and on the foundation of reference the advanced manufacture technique of home and abroad , research the new process method of narrow relief groove chevron gear.
本文主要以ZY3NB-1300型钻井泵的人字齿轮为研究对象,在借鉴国内外的先进制造技术的基础上,研究窄退刀槽的人字齿轮的加工问题。
5) double helical gear
人字齿轮
1.
Secondly,the mathematic programming model for tooth contact of double helical gears was built with non-linear programming method,which was based on finite element flexibility matrix,and the particular restriction conditions of double helical gears were imported.
通过改变刀具切削刃的形状,以三段抛物线代替齿条的直线齿廓,推导出了刀具齿面方程;基于有限元柔度矩阵的非线性规划法,引入人字齿轮特有的约束条件,建立人字齿轮接触问题的数学规划模型,通过一种改进的正规形求解,从而获得人字齿轮的承载传动误差;利用光栅测量系统对修形前后试验齿轮副的传动误差进行了测量并与理论计算结果进行了对比验证。
6) double helical gears
人字齿轮
1.
Secondly,according to the meshing characteristics of double helical gears,coordinate system for double helical gears meshing was built,and furthermore,tooth contact analysis (TCA) of double helical gears was discussed based on that of helical gears.
其次,针对人字齿轮的啮合特点,建立了人字齿轮啮合的坐标关系,基于斜齿轮轮齿接触分析,提出了人字齿轮轮齿接触分析的方法。
补充资料：繁体字和简化字对照表
繁体字和简化字对照表
[繁体字和简化字对照表]
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条