1) algebraic computer
代数计算机
2) computer algebra
计算机代数
1.
Application of computer algebra in nonlinear control of power system;
计算机代数在电力系统非线性控制中应用
2.
The computer algebra and design antenna;
计算机代数学与天线设计
3.
Through the symbol computer algebra,a fourth order perturbation solution for the one dimentional stable coupled flows of elastic fluids in the deformable porous media.
用计算机代数系统进行符号运算，求得了可变形多孔介质中弹性流体一维定常耦合渗流问题的四阶摄动解。
3) computer algebraic system
计算机代数系统
1.
In this paper,Maple,the tool of computer algebraic system,is used to derivate the analytical solution about the formation pressure in single-phase flow during the wireline formation testing.
以电缆地层测试过程中的地层渗流过程为例,利用计算机代数系统Maple推导了单相流体在测试过程中压力变化的解析表达式,以图形方式展现了在探针半径不同时压力降与时间的关系。
2.
By means of measuring the natural frequencies of a horizontal right-angled rigid frame together with the transfer matrix method by computer algebraic system.
通过实测水平放置直角刚架的固有频率 ,以传递矩阵法为基础 ,利用计算机代数系统导出以支承刚度为未知量的非线性方程组 ,求解此方程组 ,从而识别出支承刚度 ,并通过实验来验证这一方法的有效性 。
3.
With the aid of computer algebraic system, a simple algebraic transformation relation between a special type of solution of the nonlinear Klein-Gordon(NKG) equation and the nonlinear wave equation is obtained.
利用形变映射法,借助于计算机代数系统,得到一类非线性波动方程与非线性Klein-Gordon(NKG)方程特殊类型解之间的代数变换关系,由此获得了这类方程丰富的显式精确行波解,并且由这些解再次映射出了Boussinesq方程的行波解,并给出了波动图形及相关分析。
4) computer algebra system
计算机代数系统
1.
The computer algebra system-Maple and its application in the robotics;
计算机代数系统Maple及其在机器人学上的应用
2.
Design and Implementation of a Computer Algebra System;
计算机代数系统的设计与实现
3.
Using techniques of decomposition, truncation,elimination and resultant with computer algebra system, the author first gave qualitative prope rties of equilibria, and then analyzed its Hopf bifurcation both for real parameters and for integer parame.
利用计算机代数系统的分解、截尾、消去、约简、伪除等技术， 首先给出了平衡点的定性性质，进而分析了由实参数ａ，ｂ和整参数ｐ，ｑ所产生的Ｈｏｐｆ分岔。
5) computer algebra language
计算机代数语言
1.
The transfer matrix of annular strip and supporting element of a circular plate can be com- posed by computer algebra language.
给出圆板弹性支承的传递矩阵,并用计算机代数语言编写圆板环形条元及支承元件的传递矩阵,通过试验模态分析,确定圆板轴对称振型及频率,将该频率代入含待识别支承刚度的传递矩阵法中去,就可直接识别其刚度,并通过实验验证了此法的有效性。
2.
The transfer matrix method is implemented with the computer algebra language.
借助计算机代数语言,编写对接梁的传递矩阵法程序。
3.
the transfer matrix of annular strip and supporting elemet of a circlar plate can be composed by computer algebra language.
本文给出圆板弹性支承的传递矩阵,并用计算机代数语言编写圆板环形条元及支承元件的传递矩阵,通过试验模态分析,确定圆板轴对称振型及频率,将该频率代入含待识别支承刚度的传递矩阵法中去,就可直接识别其刚度,并通过实验验证了此法的有效性。
6) computer algebraic method
计算机代数法
1.
Aiming at the link curve of hinged four-bar linkage, using the computer algebraic method and by means of one by one elimination, the deducing equation set for solving the double point of link curve was derived.
针对铰链四杆机构的连杆曲线,应用计算机代数法,经过逐次消元,导出了求解连杆曲线二重点的导出方程组,由此得到了用结构参数表示的连杆曲线二重点的符号解。
补充资料：计算机输入/输出控制系统(见计算机输入/输出系统)
计算机输入/输出控制系统(见计算机输入/输出系统)
computer input/output control system
iisuanii shuru/shuehu kongzhi xitong计算机输入/输出控制系统(com-puter inPut/ou中ut eontrol system)见计算机输入/输出系统。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条