1) circular loop wheel machine
圆台车
2) full-section steel form jumbo of needle-beam type
全圆针梁钢模台车
1.
Research on bubble reduction at the bottom of lining concreted by full-section steel form jumbo of needle-beam type;
减少全圆针梁钢模台车衬砌底部气泡的研究
3) frustum of a cone
圆台
1.
Researched the differential of volume for body of rotation and the differential of area for surface of revolution by using the frustum of a cone,and pointed out the faith reason by using the cylinder to do the same thing.
利用扁圆台求旋转体的体积元素与侧面积元素,并且得出利用扁圆柱体求侧面积元素产生错误的原因。
2.
The difference of equilibrium features of cylinder, cone and frustum of a cone statically placed on a plane, is analyzed.
以此为基础,分析计算了圆柱、圆台和圆锥体的静平衡裕度,并讨论了各几何参数的变化对平衡裕度的影响。
4) pallet
[英]['pælət] [美]['pælət]
台车
1.
FEM analysis of sintering machine pallet is carried out.
运用有限单元法对带式烧结机台车进行了温度场和应力场分析,得到了不同温度时台车的应力分布场,指出了烧结机工作时台车受力的关键部位和薄弱环节,并提出了台车设计时应注意的问题和改进方向。
2.
The curvilinear shape of chain gear tooth plank is the basic cause of saw-tooth phenomenon in the sintering pallet.
链轮齿板的曲线形状是造成台车锯齿现象的根本原因,锯齿现象的存在,造成了台车端部不均匀磨损、台车使用寿命降低、烧结机漏风率及负荷增大等多种危害。
3.
The curvilinear shape of sprocket wheel is the main cause of arching phenomenon of sintering pallets in the return rail.
链轮齿板的曲线形状是造成烧结机台车在回车道上起拱的根本原因。
5) sintering pallet
台车
1.
A series of technical improvements of widening sintering pallets and intensifying granulation process was introduced.
介绍了台车加宽及混合料制粒系统系列改造 ,及在生产中的应用效果 ,指出了存在的问题并提出了改进意见。
6) trolley
[英]['trɔli] [美]['trɑlɪ]
台车
1.
The electric liquid(auto-leveling) system was designed specially for keeping the platform oftrolley(auto-leveling) during working(process.
为使衬砌台车平台在工作过程中能够实现实时自动保持水平,设计了一种基于Keilc51的电液自动调平系统。
2.
Based on the Problems of heat shack rupturing and desquamating of firebricks on trolley of heat treatment furnaces,the technology measures were put forward irrigating trolley liner using castables with high resisting heat shack performance.
针对台车式热处理炉台车衬砖热震断裂脱落问题,提出了采用高抗热震性浇注料进行台车工作衬整体浇注的技术措施,根据热处理炉的实际工作条件,完成了浇注料的研制,并在实际应用中,取得了良好的应用效果。
3.
The possibility of PLC control in trolley is analyzed.
分析基于PLC的台车控制系统的可行性,对该控制系统的特点及设计选型进行了分析。
补充资料：圆台
以直角梯形的直角腰所在直线为旋转轴，其余各边旋转一周而形成的几何体。旋转轴称为圆台的轴，在轴上的此边的长度称为圆台的高，垂直于轴的边旋转而成的圆面分别称为圆台的上底面和下底面，不垂直于轴的边旋转而成的曲面称为圆台的侧面。无论旋转到什么位置，此边都称为圆台的母线。底面半径分别为r′、r，母线为l，高为h的圆台的侧面积为s=π(r+r′)l，体积为v=[sx(]1[]3[sx)]πh(r２+rr′+r′２)。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条