1)  conveyor band
带式运输机胶带
2)  conveyor belt
带式运输机胶带
3)  band
带式
4)  belt machine
带式机
5)  belt thickener
带式浓缩
1.
This paper briefed the project survey、sludge output and feature of the papermaking sewage treating,analyzed the selecting and operation of the belt thickener-press filter.
本文分析了带式浓缩脱水机的应用先进性,介绍了某造纸厂废水处理工程概况、污泥产量性质及带式浓缩脱水机的安装、运行调试,实践表明该机在上泥量59。
6)  band braking
带式刹车
1.
Based on the test-bed of combined braking systems of drill, this paper presents a set of small band braking device controlled by mechanism or air pressure, and offers an experiment set to study their braking trait and auto-drilling of the band braking controlled by air pressure.
基于钻机组合刹车系统实验台,设计了一套小型机械/气控双作用带式刹车装置,为研究它们的刹车特性及气控带式刹车自动送钻提供了实验装置。
7)  belt conveyor
带式输送
8)  ribbon pontoon bridge
带式舟桥
1.
Four ribbon pontoon bridge models are taken as experimental objects,which were made with FRP/steel composite structure.
本文采用玻璃钢/钢材复合结构形式的4折带式舟桥模型为试验对象,对每两个方舟模型互相连接后进行竖向加载试验。
2.
The center pontoon models of ribbon pontoon bridge type 79A were taken as experimental objects, which were made in proportion to 1∶4 with fiber reinforced plastics(FRP)/steel composite structure by hand lay up moulding process.
以我军现装备的79A带式舟桥为原型,以采用手糊成型工艺制作的按1∶4比例缩小的玻璃钢(FRP)/钢复合结构的方舟模型为研究对象,采用“三弦梁”理论对模型的承载能力进行了计算。
3.
On the basis of advantages of the two materials FRP and steel,combined with the structural characters of ribbon pontoon bridge,the idea of using FRP/steel composite structure in developing new type ribbon pontoon bridge is discussed.
根据玻璃钢和钢材这两种材料的优点及现行带式舟桥的结构特点,论述了采用玻璃钢/钢复合结构研制新型带式舟桥的构想。
9)  Horizontal belt
水平带式
10)  belt-style press
带式榨汁
1.
The main factors of influencing fragrance of mixed juice beverage and processing technique of belt-style press and aseptic canning were studied.
用酯香浓郁的西番莲果实原浆与缺少酯香的刺梨果实原汁相混合 ,制成风味口感新颖的混合果汁饮料 ,对影响其风味的主要因素、西番莲和刺梨果实的带式榨汁无菌灌装以及加工工艺进行了研究。
补充资料:带式运输机
分子式:
CAS号:

性质:借助移动的连续带子来运输固体物料的一种输送设备。主要由以托架和鼓轮支持的带子、传动装置、张紧装置等组成。带子通常是橡皮带,有时用钢皮带。可以按水平或一定倾斜度运输散装的或包装的物料。物料放在带子的一端,由于摩擦力的作用而随着带子前进,然后在中途或者另一端借助卸料装置或者重力作用而卸下。主要优点是:(1)操作连续而平稳;(2)运输能力高;(3)各部分摩擦阻力较小,动力消耗较低;(4)可以延伸相当大的长度,运输距离较长;(5)可以随时装料和卸料;(6)物料破损较小;(7)安装和维修容易。缺点是:(1)价格较贵;(2)倾斜度不能太大,仅能达17°~18°,不便于升降运输。广泛应用于细散的物料如矿石、焦炭、煤、石灰、食盐、炉渣等,成件的货物如包装好的成桶、成箱、成袋物品等。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条