说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 畜力工作
1)  animal labour
畜力工作
2)  labour and live stock operation
人畜力作业
3)  workday per draught animal
畜工
4)  working pressure
工作压力
1.
Scientific selection and matching of working pressure for hydraulic components on mobile construction machine;
工程车辆液压元件工作压力的合理选择与匹配
2.
Discussion on Working Pressure of Shanghai Traffic Police and Tentative Plan of Relief;
上海交警群体的工作压力和缓解设想
3.
Review on the difference of working pressure among nurses
护士工作压力差异性的研究进展
5)  working resistance
工作阻力
1.
The theory and its application of determining working resistance of powered support in longwall with top-coal caving technology;
综放工作面支架工作阻力确定的理论与应用
2.
How To determine working resistance of hydraulic bracket;
如何确定液压支架的工作阻力
3.
Summary on Determination of the Reasonable Working Resistance of Hydraulic Support in Fully-mechanized Face
综采支架工作阻力确定方法综述
6)  working stress
工作应力
1.
In the article, the numerical simulation software ANSYS is used to analyze the working stress distribution in butt joint and the effect of the geometric parameter on the stress concentration efficiency.
通过数值模拟软件 ANSYS分析对接接头的工作应力分布 ,找出了对接接头的几何参数对应力集中系数的影响 。
2.
The crankshaft gears of diesel engine,which are interference assembled,suffer working stress from the root as well as the original interference assembly stress.
过盈装配的柴油机曲轴齿轮,其齿根部除承受工作应力外,还要叠加原始过盈装配应力。
3.
Based on experimental research, a finite element analysis to inspect constant working stresses of structures by grooving method is presented.
通过实验和有限元分析,研究了开槽法测试结构不变工作应力的可行性,根据有限元计算结果分析了开槽深度和槽间距与应力释放率和应力集中系数之间的关系,提出了采用开槽法测试结构工作应力时应选择的合理开槽深度和槽间距。
补充资料:畜力胶轮大车


畜力胶轮大车
animal drawn tyred vehicle

畜力胶轮大车(animal drawn tyredvehicle)装有橡胶充气轮胎的畜力牵引车。主要用于农村短途运物,又称牛车或马车。中国的畜力胶轮大车是由传统的畜力大车演变而成。20世纪40年代在城市近郊及乡镇有少量用旧汽车轮改装的畜力胶轮大车。50年代初北方一些工厂开始为农村生产装有橡胶充气轮胎和滚动轴承的畜力胶轮大车,至70一80年代,年产量已达10一20万辆,1988年底胶轮大车保有量达415.4万辆。 畜力胶轮大车由车架、车轴、轮毅、轮圈、国锥滚柱轴承、轴端螺母、防尘盖、轮胎(32 x6或7.5一20,气压560千帕)和制动机构等组成。有两轮车和四轮车两种,载重量可达两吨。按载重量大小配备一至数头挽畜。畜力胶轮大车的车架仍是传统的木制车架,有少量是钢管焊接的。还有毛驴牵引的小型畜力车,其车轮与手推胶轮车相同或用其改装。 畜力胶轮大车载重量大,但惯性也大,不易控制减速或停车。对此,需装设有制动机构,在下坡时由人扳动手柄控制减速,停车时则把手柄扳紧,用棘齿锁住,行车时放开。(郭秦)
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条