1) piezoresistive element
压敏电阻元件
2) pressure-sensibility
压敏
1.
Analysis of pore-throat structure property and pressure-sensibility in abnormal high pressure and low permeability carbonate reservoirs in Kenjiyake;
肯基亚克油藏低渗透碳酸盐岩储层孔喉结构特征及压敏分析
3) pressure sensitive
压敏
1.
A pressure sensitive superconductor-metal-polymer composite;
一种压敏超导-金属-高分子复合材料
2.
Solvent base pressure sensitive adhesive with glass transition temperature of-48℃ was prepared from acrylic ester and polyureathane 101-B component by solution polymerization.
本文采用溶液聚合的方法[1],以丙烯酸酯和聚氨酯101-乙组分为原料,合成了玻璃化温度为-48℃的溶液型丙烯酸酯压敏胶黏剂。
4) varistor
压敏
1.
Preparation and Varistor Properties of ZnO Film;
氧化锌薄膜的制备及压敏性质研究
2.
The results showed thatSrTiO 3 based varistor ceramics,with 0.
以 L i2 CO3-Si O2 为液相掺杂剂 ,采用一次烧成工艺 ,制备出半导体的 Sr Ti O3基压敏与介电性的双功能陶瓷 。
3.
The ZnO-based materials and Pb(Mg_(1/3)Nb_(2/3))O_3-based materials were chosen as the respective varistor and capacitor components.
本文选择ZnO和Pb(Mg13Nb23)O3为基体材料,利用轧膜技术制备了多层片式结构的压敏电容双功能陶瓷元件。
5) piezoresistivity
压敏
1.
5% Nano-Al2O3 in the 10% Carbon Black composites, the carbon black can be symmertrical dispersed in silicon rubber, the piezoresistivity of composites can be improved.
在碳黑/硅橡胶复合材料中加入纳米氧化铝,制成硅橡胶类纳米复合柔性压敏导电胶,并对其进行性能测试和结果分析。
6) varistors
压敏
1.
Capacitance-voltage measurement of grain-boundary barrier in TiO2 varistors;
电容—电压测试在TiO_2压敏材料晶界势垒研究中的应用
7) pressure sensitive adhesive
压敏胶
1.
Influence of nano-SiO_2 on properties of polyacrylate emulsion pressure sensitive adhesives;
纳米SiO_2对聚丙烯酸酯乳液压敏胶性能的影响
2.
Study on preparation and properties of UV curing polyacrylate pressure sensitive adhesive;
UV固化聚丙烯酸酯压敏胶的制备及其性能研究
3.
Synthesis of moisture-curable pressure sensitive adhesive;
湿固化压敏胶的合成研究
8) pressure-sensitive adhesive(tape)
压敏胶（带）
9) pressure-sensitive adhesive
压敏胶
1.
Study on the solvent type pressure-sensitive adhesive of rubber series;
溶剂型橡胶系压敏胶的研究
2.
Study on acrylic emulsion pressure-sensitive adhesive for protective film;
表面保护胶带用聚丙烯酸酯乳液压敏胶的研究
3.
Development ofpolyacrylate emulsion pressure-sensitive adhesive used for bandage;
绷带用聚丙烯酸酯乳液型压敏胶的研制
10) pressure-sensitive reservoir
压敏油藏
1.
Evaluation on inflow performance relationship of gas wells in pressure-sensitive reservoir using generalized pseudo pressure;
用广义拟压力方法确定压敏油藏气井流入动态
补充资料：表面防护用压敏胶带
分子式：
CAS号：
性质：用于家具、窗框、板状玻璃、金属材料的表面保护，防止金属材料生锈，在生产工艺过程和运输中受冲击而划伤。使用的基材有塑料薄膜和纸等。胶液主要有丙烯酸酯压敏胶和橡胶型压敏胶两种。
CAS号：
性质：用于家具、窗框、板状玻璃、金属材料的表面保护，防止金属材料生锈，在生产工艺过程和运输中受冲击而划伤。使用的基材有塑料薄膜和纸等。胶液主要有丙烯酸酯压敏胶和橡胶型压敏胶两种。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条