说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 麻点漏油
1)  pit leak
麻点漏油
2)  spilling point
漏油点定位
3)  Missing immunization for measles vaccine
麻苗漏种
4)  leak dot
漏点
1.
This format improve the process of lined head,so that the process can achieve the requirement of clinging to the head,and guarantee the lining of stainless steel without leak dot,and play a full role in cleanness and environmental protection.
对实际生产中的内衬不锈钢工艺进行合理化分析,采用整体热压形式改进封头衬里工艺,使该工艺能够达到与封头紧贴的要求,保证不锈钢内衬层无漏点,起到清洁、环保的作用。
5)  Oil leak
漏油
1.
Oil leak was a problem of transfer arm in spider mechanism in PROTOS cigarette making machine,the leaked oil would enter the negative pressure passage and pollute cigarette.
PROTOS卷接机组的烟支输送系统采用的蜘蛛手机构传送臂存在着漏油问题,漏出的润滑油会进入负压通道,污染烟支。
2.
According to analyzing the concrete structure of the precise follow-up calipers grinder, this article brought forward a solution to solve this grinder detector oil leak question, and the effect is good in the preliminary use.
本文通过对精密随动卡规磨床的具体结构进行分析和研究,提出了解决该机床随动机构漏油问题的思路和方法,并在初步使用中发现效果良好。
3.
The paper objectively and fully expounds and analyses the oil leak problems and causes of the equipment on the new dry cement production line, and raised a solution by using grease.
客观、全面地阐述和分析了目前我国新型干法水泥生产线普遍存在的设备漏油问题及原因,并提出了使用润滑脂的解决办法,对新型干法水泥企业提高现场设备管理水平具有较高的参考价值。
6)  oil leakage
漏油
1.
Investigation of oil leakage of main shaft seal and its improvement for hydraulic turbine in Sangke Water Power Station;
桑科电站水轮机主轴漏油问题的研究和改造
2.
The reason of 4.3m crop shear's latch cylinder oil leakage and countermeasure
4.3米切头剪液压安全销漏油原因分析及对策
补充资料:油点
分子式:
CAS号:

性质:分析化学试样预处理及分析过程中,由于试剂、溶剂纯度低,容器清洁度不够或有杂质溶出,实验室不够整洁及空气净化不好,均可将外界物质引入试样中,导致分析结果出现偶然误差或系统偏差。沾污是痕量分析中的重要问题,应有必要措施防止和减少沾污。(二)stain-ing  又称油点(oilyspot)。涂膜暴露在户外时,其表面因老化而产生微小的空隙,同时,受阳光照射而变软,此时,易被灰尘或污垢所沾污,且不易用水洗去或擦掉,称为沾污。对涂膜,尤其是白色涂膜的外观影响较大。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条
油麻