1) PWP
纯水渗透率
2) water phase permeability
水相渗透率
1.
The relation curves of water phase permeability of reservoir cores and back-pressure were obtained.
得到了裂缝性低渗透储层岩心水相渗透率随回压的变化曲线。
2.
The coal core flow tests are conducted in following steps: injecting 5 g/L salt water to measure water phase permeability,K_w;injecting in opposite direction N_2 gas to measure gas phase permeability,K_g,changing with time,t;injecting 2 g/L surfactant solution in the salt water and measuring K′_w;injecting in opposite direction N_2 gas to measure K′_g,changing with t;the water phase .
煤岩心流动实验程序如下:注5 g/L盐水测水相渗透率Kw,反向通氮气0。
3) hydraulic permeation rate
水力渗透率
4) waterflood permeability
水驱渗透率
5) rate of water infiltration
水分渗透率
6) oil-water relative permeability
油水相对渗透率
1.
Application of oil-water relative permeability curve and dynamic data to defining waterflood sweep situation;
应用油水相对渗透率曲线和动态数据确定水驱波及状况
2.
Based on the actual practice of Longdong Oilfield, the oil-water relative permeability curve were measured according to the oil and gas industry standard of China SY/T 5345-1999"Methods for Measuring Non-stable Oil-water Relative Permeability".
以陇东油田为实际背景,应用石油天然气行业标准SY/T5345-1999《非稳态法油水相对渗透率测定方法》进行了油水相对渗透率的测定。
补充资料：渗透率
分子式：
CAS号：
性质：液体以层流状态通过粉粒物形成填充层时，其渗透性能是不同的。如以渗透率K表示此性能，则。V0为液体的表观速度，m/s; μ为液体的黏度，kgf·s/m2；△P为粉粒层两端压强差，kgf·s/m2；L为粉粒层厚度，m；△P/L为压强梯度。
CAS号：
性质：液体以层流状态通过粉粒物形成填充层时，其渗透性能是不同的。如以渗透率K表示此性能，则。V0为液体的表观速度，m/s; μ为液体的黏度，kgf·s/m2；△P为粉粒层两端压强差，kgf·s/m2；L为粉粒层厚度，m；△P/L为压强梯度。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条