1) surge forward current
正向冲击电流
2) surge current
冲击电流
1.
Test of densification effect of surge current on compacted iron powder;
冲击电流对粉末压坯致密作用的试验
2.
Analysis of surge current due to closing loop in distribution grid;
配电网络合环冲击电流的分析
3.
The mathematical model of closing loop operation is established and a method for surge current calculation based on Thevenin s equivalent is proposed in this paper.
针对合环操作冲击电流可能越限的问题,提出一种基于戴维南等值的冲击电流计算方法。
3) Current impacting
电流冲击
1.
The electrical properties of the PTC materials were investigated by current impacting.
用电流冲击法对炭黑填充高密度聚乙烯(CB/HDPE)PTC材料的稳定性,即重复使用性进行了研究,结果表明用1～3A的电流冲击最能有效地改善本配方PTC材料的性能和稳定性,具有广阔的实用价值。
4) rush current
冲击电流
1.
This article describes that rush current does harm to xenon lamp from its structure and working principal.
围绕氙灯的构造及其工作原理就冲击电流对氙灯损害进行讨论，针对当前ＷＬＣ系列和ＧＦＡ系 列等整流器产品，普遍对冲击电流没有控制或控制不佳所造成的对氙灯的损害，提出对ＧＦＡ０２ －１５０／３５型整流器原磁饱和电抗器回路增力。
5) inrush current
冲击电流
1.
This paper proposes a novel method of suppressing the inrush current of transformers.
提出了抑制变压器冲击电流的新方法。
2.
Article describes the principle of inrush current.
浅述了变压器的冲击电流的形成原理,认为主要是由于外部瞬间电流导致磁路趋向饱和,而磁路中的剩磁则加剧了这个饱和程度,最大冲击剩磁通,使这两者同向叠加。
6) impulse current
冲击电流
1.
A fast transfer criterion is presented,using the product of the initial frequency difference of the bus residual voltage after outage and the dead beat voltage RMS(Root Mean Square) between the standby power supply voltage and the bus residual voltage to predict the impulse current.
分析了发电厂厂用电源现有快切装置的现状和依据,提出了通过计算备用电源电压和母线残压之间的差拍电压有效值与断电后母线残压初始频差的乘积,以预测冲击电流的大小,并以此为判据的快切新原理。
2.
From the view of point of factors that influence measuring accuracy of impulse current system,the many problems which include the selection of voltage reference end,connecting manner of converting apparatus and self electromagnetic interference of impulse current system are studied.
从影响冲击电流系统测量精度的因素出发,试验研究了系统接地点、转换装置的连接方式及系统自身的电磁干扰等对测量精度的影响。
3.
Starting from the circuit theory, the RLC impulse current cir(?)it for non-linear resistances are studied.
在线性RLC冲击电流发生回路研究的基础上,提出了非线性被试品冲击电流发生回路的设计原则:当线性调波电阻取值为非线性被试品动态电阻范围的(0。
补充资料：标准冲击电流波形(见冲击电流发生器)
标准冲击电流波形(见冲击电流发生器)
standard impulse current wave form
blaozhun ehonglld}0n4一u box]ng标准冲击电流波形(standard impulse currentwave form)见冲击电流发生器。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条