1) weaving
[英][wi:v] [美][wiv]
交织;堆宽焊缝
2) surfacing weld
堆焊焊缝
1.
The effects of alloy element C,Nb,Ti and V on the hardness and distribution of carbides in surfacing weld metal were investigated,and a kind of weld metal with high hardness was achieved.
研究了堆焊焊缝的硬度及碳化物分布,分析了C、Nb、Ti、V对硬度的影响,优选了一种硬度高、碳化物分布均匀的堆焊焊缝。
3) weld pool width
焊缝熔宽
1.
Based on the research of real-time measuring the weld pool width with a dual wavelength optical filter,a fuzzy control system of welding pool width has been developed.
在双波长滤光片正面实时检测焊缝熔宽技术的基础上建立了焊缝熔宽模糊控制系统。
4) weld width
焊缝宽度
1.
Weld-shape(butt weld width,size of fillet weld)is an indicator of weld features and it also is an important factor of quality welding.
焊缝尺寸 (如对接焊缝的焊缝宽度、角焊缝的焊角尺寸等 )是表示焊缝形状特征的指标 ,是影响焊缝质量的重要因素之一。
2.
5) , weld width (H/c=0.
5 )、焊缝宽度 (H/c =0 。
3.
In addition,the changes of the laser pulse width and pulse frequency to affect the weld width were investigated.
此外,对激光脉冲宽度及脉冲频率对焊缝宽度的影响作了深入研究。
5) weld microstructure
焊缝组织
1.
With optimum magnetic intensity and frequency, the weld microstructures were almost fine equiaxed grains and the weld shape was .
当磁感应强度和频率匹配合适时,焊缝成形良好, 焊缝组织几乎为细小的等轴晶。
2.
Based on the Schaeffler diagram, a software that predicts the weld microstructure of dissimilar metal weldments is designed, and its application is illustrated with an example.
利用舍夫勒图 ,设计了一套软件 ,用它可以预测异种钢接头焊缝组织 ,并通过一个具体实例说明了该软件的应用 。
6) microstructure
[英]['maikrəu,strʌktʃə] [美]['maɪkro,strʌktʃɚ]
焊缝组织
1.
Effect of longitudinal magnetic field on microstructure and properties of MIG weld joint of mild steel;
纵向磁场对低碳钢MIG焊焊缝组织及性能的影响
2.
The microstructure of the tested alloys were systemically investigated by means of optical microscope and JSM-5600 scanning electron microscope(SEM),and the relation between microstructure and the welding hot cracking susceptibility was discussed.
采用横向变拘束试验,研究铝锂合金(A合金)和2024合金的焊接热裂纹敏感性;并对焊缝组织进行分析,探讨它对两种合金焊接开裂倾向的影响。
3.
By adjusting Cr content,the changes of the microstructure and mechanical properties of a Fe-base manual SHS welding joint were studied.
研究表明:当焊接接头的含Cr量(质量分数)小于3%时,随Cr的增加,焊缝析出的富Fe相增多,富Fe相显微硬度提高,富Fe相熔合区加宽,提高了焊接接头的力学性能;当含Cr量大于4%时,抑制了富Fe相和富Cu相的液相分离,焊缝组织趋向均匀化的Cu基合金,熔合区Cr与C形成碳化物,出现微裂纹,焊接接头的力学性能降低。
补充资料：交织
交织 一、经纱与纬纱在织物中相互沉浮。二、织机上经纱与纬纱织成机织物的过程。三、经线、纬线不是同一原料的织物又交织品。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条