1) continuous process furnace
连续处理加热炉
2) reheating furnace
连续加热炉
1.
An optimal study on the fuel consumption of reheating furnace;
中型轧钢厂连续加热炉各段供热优化研究
2.
Based on total heat exchange factor method,the online control process for reheating furnace was studied by simulation.
以总括热吸收率法为基础,对连续加热炉在线控制过程进行了软件仿真研究。
3.
By analyzing heat exchange in reheating furnace, a mathematician model of metal reheating process is established.
建立了炉内金属加热过程的数学模型,并以该模型为实验手段,对冶金企业连续加热炉的自寻最优控制进行了离线仿真。
3) continuous heating furnace
连续加热炉
1.
Analysis for continuous heating furnace of the nonlinear fusion in the running state;
连续加热炉运行状态非线性融合分析
2.
Neural network fusion analysis of the running states for continuous heating furnace;
连续加热炉运行状态神经网络融合分析
3.
This paper evaluates the application effects and problems that multicrystal mullite refractory fabrics be sticked to the inner linings of continuous heating furnace through thermal measure and calculation.
通过热工测试与计算 ,评价了多晶莫来石耐火纤维在连续加热炉上的应用效果及问
5) continuous reheating furnace
连续式加热炉
1.
The reformation of side discharge roll table of continuous reheating furnace is introduced.
介绍了端出料连续式加热炉炉头辊道的改造。
2.
The reheating process of billet in continuous reheating furnace is studied by using numerical simulation method.
用数值模拟的方法研究了连续式加热炉内钢坯的加热过程,分析了滑轨结构、滑轨高度和滑轨材质等对钢坯黑印温差的影响,为消除钢坯黑印、提高钢坯加热质量提供了理论依据。
6) axial continuous furnace
轴向连续加热炉
补充资料:连续加热炉
分子式:
CAS号:
性质:为轧钢或锻造车间中小型钢坯或钢锭的加热设备。炉膛为长条形,钢坯或钢锭由炉子一端连续推入,经过炉膛,由炉子另一端连续卸出。炉气沿炉长方向流动,多与金属逆流,个别为并流。炉温沿炉气流动方向逐渐降低,但炉内务点的温度不随时间而变。按炉内温度制度可分为:两段、三段以及多段连续加热炉。有仅从上面加热金属的单面加热炉,有上下同时加热的两面加热炉。图示为一种以煤气为燃料的三段连续加热炉。钢锭由左端推入,由右端卸出。用于加热方形及圆形钢坯及钢锭、板形钢坯或薄板。
CAS号:
性质:为轧钢或锻造车间中小型钢坯或钢锭的加热设备。炉膛为长条形,钢坯或钢锭由炉子一端连续推入,经过炉膛,由炉子另一端连续卸出。炉气沿炉长方向流动,多与金属逆流,个别为并流。炉温沿炉气流动方向逐渐降低,但炉内务点的温度不随时间而变。按炉内温度制度可分为:两段、三段以及多段连续加热炉。有仅从上面加热金属的单面加热炉,有上下同时加热的两面加热炉。图示为一种以煤气为燃料的三段连续加热炉。钢锭由左端推入,由右端卸出。用于加热方形及圆形钢坯及钢锭、板形钢坯或薄板。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条