1) radio frequency welding
射频焊接
2) High frequency welding
高频焊接
1.
Study on process control for high frequency welding based on expert system;
基于专家系统高频焊接过程控制的研究
2.
The micro-character of weld line in copper tubes with inner grooved by high frequency welding for air-conditionings and refrigerators was briefly studied,the existent manner and the reason of quality problem were found out,betterment measure was put forward and realized,the problem in the production was settled and the product quality became stable.
通过对空调与制冷用高频焊接内螺纹铜管焊缝微观组织特性的研究,找出了焊管质量问题的存在方式及其产生原因,提出了改进方法并加以实现,最终解决了生产中存在的问题,使产品质量得到了稳定。
3.
The high frequency welding procedure and its forming fundamental of spiral fin pipe is introduced.
介绍了螺旋翅片管高频焊接工艺及其成型基本原理。
3) high-frequency welding
高频焊接
1.
Optimum control of the high-frequency welding output power based on simulated annealing genetic algorithm;
基于模拟退火遗传算法的高频焊接输出功率优化控制
2.
Uneven-margins of thin wall copper and brass tube or pipe of high-frequency welding and its causes were investigated and analyzed.
分析了薄壁铜及铜合金高频焊接焊缝接头的错位及其产生的主要原因,研究了焊缝接头错位与焊接过程稳定性及焊缝强度的关系,提出了焊缝接头错位的预防和控制方法。
3.
Therefore, researching and designing a high-frequency welding H-beam production line has very important practical significance.
H型钢高频焊接自动化生产线因其生产效率高、精度高、容易控制等特点,逐渐发展成为H型钢制造成型的主要方法。
4) intermediate-frequency welding
中频焊接
5) transmission welding
透射焊接
1.
Fixture design of laser transmission welding plastics;
激光塑料透射焊接夹具设计
2.
Experiment research on laser transmission welding of two different thermoplastics
两种不同热塑性塑料之间的激光透射焊接试验
3.
The influence of laser transmission welding parameters for polypropylene(PP) plastics on welding quality is investigated by orthogonal design method.
利用正交实验方法,研究了聚丙烯(PP)塑料的激光透射焊接工艺参数对焊接质量的影响。
6) injection welding
注射焊接
补充资料：高频焊接聚氨酯泡沫塑料
分子式：
CAS号：
性质：采用高频焊接法将聚氨酯软泡与热塑性材料粘接在一起的一种塑料复合软泡。软泡在高温(150～200℃)、高压(≥0.6MPa)下与热塑性材料形成点线式粘接，焊缝的最终厚度为原泡沫厚度的2％～5％，有明显的轮廓线。
CAS号：
性质：采用高频焊接法将聚氨酯软泡与热塑性材料粘接在一起的一种塑料复合软泡。软泡在高温(150～200℃)、高压(≥0.6MPa)下与热塑性材料形成点线式粘接，焊缝的最终厚度为原泡沫厚度的2％～5％，有明显的轮廓线。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条