1) angular misalignment
角位移，角偏差，角度失准
2) angular position deviation
角位偏差
3) angle motion
角度偏移
1.
Algorithm to identify image centroid and angle motion based on Taylor series expansion;
基于泰勒级数展开的图像质心和角度偏移识别算法
4) angle deviation
角度偏差
1.
Through comparing the image of the sample with the stand- ard one,the angle deviation and position deviation was obtained.
通过对摄取到的实际套准标记图像和标准图像进行比较,输出其角度偏差值和位置偏差值,以此作为自动套准控制系统中时印刷机套准调节的依据,并对一种"米"形套准标记的识别和检测进行了分析。
2.
The model with angle deviation was detail discussed, correct model could be made by exactly angle measurement.
分析了基于球杆仪的数控机床误差补偿测试原理 ,讨论了由于角度偏差引起的误差 ,指出基于球杆仪误差补偿模型的缺陷 ,提出采用该种模型必须精确测量角度
3.
Through comparing the image of the sample with the stand- ard one,the angle deviation and position deviation was obtained.
通过对摄取到的实际套准标记图像和标准图像进行比较,输出其角度偏差值和位置偏差值,以此作为自动套准控制系统中对印刷机套准调节的依据,并对一种"(?)"形套准标记的识别和检测进行了分析。
5) angle windage
角度偏差
1.
The effect of angle windage on the linking intensity of interference fits;
角度偏差对过盈联接强度的影响
2.
On the basis of analyzing the pressure change aroused by angle windage on linking length, this thesis presents a math model of circle moment for interference fits in the dissimilarity of generatrix angle, then states the effects opposite circle moment because of angle windage, thus, to provide reference for the design of taper interference fit
本文在分析母线角度编差引起配合长度上压力变化的基础上,提出了在母线角度不同时计算圆锥过盈连接圆周力矩的数学模型,论述了母线角度偏差对相对圆周力矩的影响,为圆锥过盈联接的设计提供了重要的理论参考依据。
6) angular misalignment
角度偏差
1.
The effect of GRIN lend misalignment,end separation,lateral displacement and angular misalignment on coupling efficiency of optical signal transmitting system is tested and investigated by coupling between the GRIN lens and detector.
通过自聚焦透镜和光电探测器耦合系统,研究、测试了自聚焦透镜装配引起的轴向距离、角度偏差和离轴偏差对信号传输系统耦合效率的影响。
补充资料：角位移
| 角位移 见角速度。 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条