1) cup fracture
杯形断口
2) cup-cone fracture
杯锥断口
1.
The mechanism of cup-cone fracture formation during high carbide low alloy steel wire drawing has been investigated.
对高碳低合金钢丝拉拔杯锥断口形成的原因进行了实验分析,结果表明,高碳低合金钢丝拉拔杯锥断口的根本原因是钢丝芯部组织缺陷和钢丝拉拔过程中芯部与外层的不均匀变形共同作用的结果。
3) cup fracture
杯状断口
4) cup-cone shaped fracture
杯锥状断口
1.
To study cup-cone shaped fracture during drawing of high carbon wire rod by SEM and metallographic examination.
采用扫描电镜、金相分析等手段,对高碳钢盘条在冷拔过程中出现杯锥状断口进行研究。
5) fracture morphology
断口形貌
1.
Analysis on structure and fracture morphology of short fiber reinforced aluminum-silicon alloy composites;
短纤维增强铝硅合金复合材料的组织与断口形貌分析
2.
Microstructure and fracture morphology of 37Mn5 continuous casting billet;
37Mn5连铸坯显微组织及断口形貌研究
3.
And the fracture morphology was analyzed by SEM.
7%Cu合金熔体结构特征及变化过程,用扫描电镜观察断口形貌。
6) fractograph
['fræktəuɡrɑ:f]
断口形貌
1.
The crack fractographs of X60 pipeline steel after 10% per-tension deformation under cyclic loading are investigated by the SEM.
用扫描电镜(SEM)分析了X60管线钢在未变形和10%的预拉伸变形后循环载荷下的裂纹断口形貌。
2.
Al matrix composites reinforced with various sizes and contents of SiCp were fabricated via powder metallurgy followed by hot extrusion,and their tensile properties and fractographs were examined.
5%,5%)亚微米(130 nm)和微米级(14μm)的SiCp增强铝基复合材料,并对其拉伸性能及断口形貌进行了分析。
3.
Study on the Fractograph of SiC/Al Composites by Pressureless Infiltration Technique;
采用SEM、EDX等分析技术对无压浸渗法制备SiC/Al复合材料的断口形貌进行了分析。
补充资料：杯锥断口
cupconefracture：圆柱形拉伸试件于延性断裂（韧性断裂）后，一侧的断口呈杯状，另一侧的断口呈锥状，两者合称杯锥断口。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条