说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 分格,划分
1)  divide into sections
分格,划分
2)  meshing [英][meʃ]  [美][mɛʃ]
网格划分
1.
Meshing and Remeshing Techniques for Hexahedral Mesh in the Finite Element Simulation of Plastic Forming;
塑性成形有限元模拟六面体网格划分和再划分技术
2.
Modeling and Meshing Analysis on Gear of Teeth Modification Based on ANSYS;
修形齿轮的ANSYS参数化建模和有限元网格划分研究
3.
FEA Meshing Method Based on ANSYS;
基于ANSYS的有限元网格划分方法
3)  mesh generation
网格划分
1.
The FEM mesh generation method based on characteristic;
基于参数化模型特征的有限元网格划分方法研究
2.
Flow field size selection and mesh generation of 3D numerical simulation of flow around a circular cylinder
三维圆柱体绕流数值模拟流场选择及网格划分
3.
Aiming at its special structure characteristic, one mesh generation method with dividing the boundary unrestrictedly is applied on the new screen.
针对其结构特点,利用非自由边界分割法,对其进行了网格划分,并依据等参单元拟合割缝边界的情况来控制网格密度,经网格质量评估,证明了此种网格划分方法的有效性及精确度,这种方法不仅适用于各种类型割缝筛管,也适用于开有矩形、方形等孔口的厚壁筒形构件以及旋转构件裂缝的有限元模拟,对于实际应用有很大的利用价值。
4)  Mesh partition
网格划分
1.
Classifying of mesh partition algorithms in arbitrary area;
任意区域的网格划分方法分类
2.
The key technologies of graphic processing for EMC software in the vehicular communication system were presented,including the graphic visualization for the validation of geometric models,the automatic mesh partition of scatterers based on the method of moment,the creation of the color map of surface current and electromagnetic field of the scatterers.
论述了通信车系统EMC分析软件中图形处理的几项关键技术,包括几何模型验证的图形可视化、基于矩量法的散射体自动网格划分、散射体面电流彩色云图的生成、空间场强彩色云图的生成;给出了模型显示的染色算法、网格划分算法、面电流和场强彩色云图的生成算法。
3.
Collision detecting, optimization of vertex, edge processing, and integrated optimization of meshes were realized in the mesh partition.
从数据模型的任意一点开始选择一个初始的四边形网格单元,采用动态边界边扩展的方法在三维空间直接进行四边形网格划分;在网格划分过程中实现了边界冲突检测、网格顶点优化处理、网格边界处理和网格综合优化。
5)  mesh [英][meʃ]  [美][mɛʃ]
网格划分
1.
Objective To obtain more accurate corneal surface equations for myopes through surface meshing of both the anterior and posterior surfaces of the cornea,3D coordinate measurements,acquisition and analysis.
目的通过对近视眼患者角膜前、后表面的网格划分,三维坐标的测量、采样和分析,拟合出较为精确的近视患者角膜前、后表面的通用曲面方程,为后续研究奠定基础。
2.
According to the character of injection molding CAE analysis, a powerful finite element mesh system is developed for plane and surface by introducing control function of mesh size,the high quality mesh method to plane region and surface region is proposed on Delaunay triangulation.
根据注塑模CAE分析的特点,采用Delaunay三角化方法,并引入网格尺寸控制函数,对平面和曲面进行高质量的网格划分,在此基础上开发了功能强大的有限元网格划分系统。
3.
This paper mainly researched on parametric description and meshing algorithm for the free surface of spatial structure with the program development.
本文主要研究了空间结构中自由曲面的参数化描述及网格划分算法,并编制了相应的程序。
6)  grid partition
网格划分
1.
Research of localization mode for wireless sensor networks based on grid partition
基于网格划分的传感器网络定位方法的研究
2.
The algorithm presents a clear and precise membership function for every cluster after data preprocessing by traditional grid partition.
在定义隶属度函数前先做网格划分,形成数据簇的基本形状,并提供真实的参数信息参与此后的隶属度函数定义。
3.
In accordance with the practical requirement of power network, the advantages and disadvantages of several representative multi dimension index methods as BSP-tree, (KDB-tree), R\++-tree and grid partition are analyzed, and their efficiency on 2D-spatial index is compared.
针对配电网络的实际应用情况,分析对比了BSP树、KDB树、R+树、网格划分等方法针对二维空间数据索引的效率,及其优缺点。
补充资料:登格
1.符合规格;合乎法式。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条