说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条
叶梢间隙比  叶顶间隙流  叶间隙风速  叶片叶尖间隙  叶尖间隙,叶尖余隙  船体叶梢间隙;齿顶间隙 
说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 叶列间隙
1)  duct region
叶列间隙
2)  tip clearance
叶尖间隙
1.
In order to study the influence of tip clearance flow on the performance of a transonic compressor,a high-load transonic fan s rotor with five constant width clearances and two step-clearances were numerically simulated.
为研究跨声压气机叶尖间隙流动对性能影响的特征,数值计算了某高负荷跨声风扇转子在5种等高间隙和两种阶梯间隙结构下的性能。
2.
The influence of tip clearance on the performance of fan rotor has been investigated by numerical method at different clearances.
在不同叶尖间隙下,对高负荷风扇转子的特性进行了研究;通过数值方法分析了叶尖间隙对转子特性的影响。
3.
The 3-D flow of the first rotor with tip clearance of a three-stage fan is simulated.
对某三级跨声速风扇第一级转子带叶尖间隙的三维流动进行了数值模拟,分析了6种不同叶尖间隙下转子的性能和失速裕度,发现转子在无间隙时总压比和等熵效率最高。
3)  blade tip clearance
叶顶间隙
1.
Analysis of the flow through the blade tip clearances of axial pumps by CFD;
轴流泵叶顶间隙流动的计算流体动力分析
2.
Optimization design of turbine blade tip clearance shapes
涡轮叶顶间隙形态的优化
3.
The results of the study indicate that the blade tip clearance will lead to a flow blockage at the top zone and increase the separation loss at that zone.
结果表明:动叶叶顶间隙会造成顶部区域的通流阻塞并加重顶部分离损失,根部倒角会减小根部的气流折转角,降低做功能力,而且扩大根部分离区,减小根部流量,增大根部分离损失,因此为了提高数值模拟的准确性应考虑动叶叶顶间隙和根部倒角。
4)  Tip clearance
叶顶间隙
1.
3-D numerical analysis of the tip clearance of an aero-engine high pressure turbine;
某型航空发动机高压涡轮叶顶间隙三维数值分析
2.
Numerical analysis of the secondary flow and tip clearance leakage loss
二次流与叶顶间隙损失的数值研究
3.
Numerical analysis of high pressure turbine tip clearance variation
高压涡轮叶顶间隙变化的数值分析
5)  gate clearance
导叶间隙
1.
The unit can not start in much gate clearance.
同时在考虑漏水转矩的情况下,完成了两座抽水蓄能电站混流式水泵水轮机组泵工况起动过渡过程的校核计算,分析了导叶间隙、漏水量等对起动过程的重要影响,过大的导叶间隙将使机组不能起动。
6)  vane's tip clearance
静叶间隙
补充资料:大尖叶(dajianye)
 

大尖叶(dajianye)

茶树无性系品种之一。

灌木型,中叶类,树姿半开展,分枝密度适中。叶呈倒披针形,长10.1cm,宽3.5cm,叶色黄绿,着叶形态稍上斜。花冠长径为44mm,短径为33mm。花瓣7片,花萼无毛,抗性较强。3月下旬萌芽,4月中旬开采。适制工夫红茶和绿茶。亩产干茶150kg左右。宜在湖南省茶区栽培。

大面白(damianbai)

茶树无性系品种之一,原产江西省上饶县上泸乡及钻山、龙元岗一带,栽培历史已有一百余年。

植株小乔木型,大叶,树姿开张,分枝疏。叶长椭圆,水平或下垂着生,叶面平展。叶肉隆起,色绿具光泽,叶厚柔软,叶缘波状,锯齿粗大整齐、花大、结实少。

早生种,育芽力强,芽粗长,高产,芽叶茸毛多,色黄绿,持嫩性强。鲜叶茶多酚含量28.5-35.6%;水浸出物44.2-46.3%,制绿茶品质较好。抗性强,耐-15℃低温,扦插成活率高,适宜在江西及邻近几省绿茶区推广。