1) lumped parameter
集中参数;集总参数
2) lump parameter
集总参数，集中参数
3) lumped parameter
集总参数
1.
Mathematically, the state equations governing vibration isolation behaviors of the PHEMs are presented and solved by means of the lumped parameter method and the bond graph procedure.
采用集总参数法和键合图法建立了惯性通道式、解耦盘惯性通道式以及节流盘解耦盘惯性通道式三种液阻悬置的动力学模型,建立了状态空间方程,获得了液阻悬置低频和高频的动态特性,对比分析认为惯性通道解耦盘式液阻悬置和节流盘解耦盘惯性通道式液阻悬置具有良好的频变幅变特性,而节流盘惯性通道解耦盘式液阻悬置拓宽了被动液阻悬置高频的使用频率,改善了惯性通道式和惯性通道解耦盘式被动液阻悬置高频的动态特性。
2.
In order to investigate dynamic characteristics of airliner cabin humidity in flight,a dynamic model was established,by means of Lumped Parameter Method with physical analysis and logical simplification.
为研究飞行过程中旅客机座舱湿度的动态特性,通过合理的分析与简化,应用集总参数法建立了座舱湿度的动态特性模型,给出了加湿系统调节阀的数学模型,并根据模型对整个飞行过程中座舱湿度的动态特性和加湿系统的控制策略进行了仿真研究。
3.
Not only the zero-sequence lumped parameters of the transmission lines but also the distributed ones are needed to measure.
电力工程上不但需要知道互感线路的零序集总参数, 有时还需要知道分布参数。
4) zoning statistics of reserve parameters
参数集总
1.
Using deviation data,well data,layering data,sand body data,well logging interpretation data and interbed data,its function includes deviation correction,statistics of sand body thickness and sand-shale ratios,interbed data computation,interbed deduction and net computation,zoning statistics of reserve parameters,coordinate selection,and data format translation between common softwares.
该程序以井斜数据、井数据、分层数据、砂体数据、测井解释成果表及夹层数据为基础,分析储层评价工作中数据间的关系,设计了相应的算法,实现了井斜校正、按层统计砂体厚度及计算砂地比、夹层统计、自动扣除夹层及有效厚度计算、储层特征参数和储量计算参数集总、坐标添加及常用绘图软件数据格式转化等功能。
5) lumped parameter
集中参数
1.
The paper analyzes and compares the lumped parameters that are replaced the distributed parameters of actual cable for intrinsically safe explosion-proof test.
针对在本安防爆检验中用集中参数代替实际电缆的分布参数进行了分析比较,此方法在实际本安性能检验中得到了具体的、广泛的应用。
2.
Aimed at the deficiency of multi-terminal transmission line fault location at present,combining with the fault location algorithm of transmission line which does not have branch,the author proposed the fault circuit identification method of T-connection transmission line,and solved the fault location with the lumped parameter circuit model and the distributed parameter circuit model.
针对当前多分支输电线路故障测距的不足,结合无分支输电线路的故障测距算法,提出T接输电线路的故障分支识别,并采用集中参数线路模型和分布参数线路模型求解故障距离。
3.
Describes a frequency multiplier of step recovery diode with lumped parameter from tens MHz to hundreds MHz.
介绍了一种从几十兆赫到几百兆赫的集中参数式的阶跃恢复二极管倍频器，并对其电路及实验结果分别进行了讨论。
6) concentrated parameter
集中参数
1.
Based on the theory of the concentrated parameter, a three-dimensional dynamic model with 12 degrees of freedom for the spiral bevel gear transmission system was developed, where the flexional, torsional, axial and rotational motion were considered.
基于集中参数法建立了弧齿锥齿轮的多自由度弯-扭-轴-摆耦合振动三维空间十二自由度动力学模型。
2.
Based on the theory of the concentrated parameter,a three-dimensional dynamic(model) with multiple degrees of freedom for coupling vibration of a spiral bevel gear transmission system was developed,in which the flexional,torsional,axial and rotational motions were considered.
基于集中参数理论,建立了弧齿锥齿轮的多自由度弯曲-扭转-轴向移动-扭摆等耦合振动的三维空间动力学模型。
3.
The concentrated parameter method and the movable boundary method are used to set up the simulation system of the once-t.
新型直流蒸汽发生器采用双面传热的双层套管结构,一次侧的单相流体分别在内、外侧强迫流动,二次侧经过相变的流体逆向强迫流动,根据这些特点,对其进行热工和水力分析,采用集中参数处理方法和可移动边界法,建立了直流蒸汽发生器的数学模型和仿真系统。
补充资料：集总参数系统
即集中参数系统（见分布参数系统）。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条