1) pressure-temperature rating
额定热力参数
2) Rated parameter
额定参数
1.
This paper analyzes the kinds,functions and technology requirements of circuit protective device on CHANCHE PLOUGH car,and introduces the key factors when we choose rated parameters of the fuse.
分析了昌河北斗星汽车用电路保护装置的种类、作用及技术要求 ,介绍了在选择熔断丝额定参数时应考虑的关键因
2.
Based on 1 000 kV power transmission pilot project in China, the grouping mode of such a low voltage capacitor bank and its maximum group capacity are determined, the selection of rated parameters of the shunt capacitor device and its connection mode are researched, besides, the close inrush current of the shunt capacitor device is verified.
文章结合特高压试验示范工程,确定低压电容器组的分组方式及最大分组容量,研究电容器装置的额定参数选择和接线方式,并对电容器装置的合闸涌流进行校核。
3) thermal parameter
热力参数
1.
On-line monitoring and fault diagnosis systems for 900 MW supercirtical units based on vibration and thermal parameters
900MW超临界机组在线振动与热力参数集成故障诊断系统
2.
Aiming at the problems in mine with high temperature and humidity,is a calculate program of the airflow's thermal parameters designed,which can be used to compute other thermal parameters by the help of thermal parameters which can be easily measured,Such as dry-bulb temperature,wet-bulb temperature,atmospheric pressure,air speed and so on.
针对煤矿的高温高湿问题,编制流热力参数测算程序,利用最易于测得的环境热力参数干、湿球湿度和大气压力以及风速,计算测点空气风流中所有其它热力参数。
4) thermal parameters
热力参数
1.
Application of state equation of the wet gas in heavy oil recovery to the calculation of thermal parameters;
应用稠油开采中湿燃气的状态方程计算热力参数
2.
The numerical relationship between the thermal parameters(time interval between upsetting and stopping,deformation degree,upsetting rate) and friction weld is studied through the friction test.
采用正交多项式和回归分析方法,系统地研究了热力参数(顶刹时差、变形量、顶锻速度)与摩擦焊接头金属性能间的本构关系;探讨了热力参数对接头金属性能的影响规律,为高温合金与耐热钢摩擦焊接成形与控制提供了依据。
3.
This paper analyzes the thermal cycle performance, thermal parameters, structure feature, smooth parameter operation model and corresponding technology for steam turbine of Integrated Gasification Combined Cycle (IGCC) power generation.
研究了IGCC汽轮机的热力循环特性、热力参数、结构的特点及其滑压运行方式和相应技
5) thermodynamic parameters
热力参数
1.
In this paper,we develop the equations of the lithium bromide-water solution s activity coefficient and thermodynamic parameters at the base of quantum mechanicsand Gibbs excess energy function.
文章基于量子力学理论和超额吉布斯能量方程建立了溴化锂水溶液的活度系数及其热力参数的计算公式,此计算公式形式简单,适用范围广,对于设计溴化锂制冷机十分有用。
6) thermodynamic parameter
热力参数
1.
Intelligent fault diagnoses of marine diesel engine based on thermodynamic parameters;
基于热力参数的船舶柴油机智能故障诊断
2.
In this thesis, a software system, which real-time discriminates on-line monitoring thermodynamic parameters of turbomachinery, is developed, applying the artificial neural networks method and based on the work of Evaluations to Thermodynamic Parameters of Centrifugal Compressors.
本文是在“离心式压缩机热力参数性能评估”工作的基础上，应用人工神经网络方法开发的透平机械在线监测热力参数实时甄别软件系统。
补充资料：额定蒸汽参数
分子式：
CAS号：
性质：额定蒸汽压力和额定蒸汽温度的总称。是表示锅炉工作性能的基本参数。通常以锅炉主汽阀出口处蒸汽的压力和温度表示。表示蒸汽压力的单位是MPa(表压)，表示温度的单位是K或℃
CAS号：
性质：额定蒸汽压力和额定蒸汽温度的总称。是表示锅炉工作性能的基本参数。通常以锅炉主汽阀出口处蒸汽的压力和温度表示。表示蒸汽压力的单位是MPa(表压)，表示温度的单位是K或℃
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条