1) soft-annealed wire
软金属线
2) soft drawn wire
软拔金属线
3) metal hose
金属软管
1.
An automatic device for metal hose welding was designed based on the common latitudinal seam welder,according to the structure of high-pressure metal hose.
在普通环缝焊机的基础上,依据高压金属软管结构特点,研制了一套金属软管焊接自动化装置,主要由旋转装置、传动机构和焊接夹具组成。
2.
This paper describes the application of the safety systems engineering method to solve the pipeline stress of the tanks' exit and entrance and the application of metal hose on the tank of the No.
简要叙述了运用安全系统工程解决油库罐区因地基下沉而造成的储罐出入口管线存在的应力问题 ,及金属软管连接在石油一厂储罐中的应用。
3.
materlal and paraineter of metal hose,the performance of the metal hose was improved,it meeted the requirement of connecting lance in Pangang converter.
通过选取金属软管的结构、材质及相关参数，改善其使用条件，满足了攀钢转炉氧枪软连接的需要。
4) flexible metal tube
金属软管
1.
There had existed corrosion and leakage problems for the flexible metal tubes at the satellite platforms in Chengdao Oilfield for many years.
对埕岛油田卫星平台多年来一直存在的金属软管漏蚀问题进行分析,找出了导致金属软管漏蚀的主要原因,提出了相应的防治措施,主要有:在金属软管外部裹附橡胶垫,采用带弯头的减振金属软管,安装时金属软管的曲率半径要大于其最小弯曲半径等。
2.
Improving the flexible metal tube used in the system of supply and return steam line for hot press,that is to avoid the leak of the steam,and then to raise the product quality and increase the production profits.
对热压机供回汽系统中金属软管进行技术改造,避免了蒸汽的泄漏,提高了产品质量,增加了生产效益。
5) metal soften
金属软化
1.
The results show that the metal soften is dominant in dry turning process, a good surface can be acquired in wet turning, and the cutting fluid takes an effective effect at the end of tool wear.
试验表明:干切削状态下金属软化效应占主导地位,湿切削可获得更好的表面粗糙度,切削液在刀具磨损后期开始发挥作用。
2.
Contrast surface roughness, depth of hardened layer and surface texture of no metal soften with which metal is soften, the result shows that there was little effect on surface quality when the metal soften is affected.
通过分析PCBN刀具切削淬硬GCr15轴承钢时,工件硬度和切削速度对切削力和切削温度的影响,给出了产生金属软化效应的条件。
补充资料：金属软管
分子式：
CAS号：
性质：由钢带卷绕制成或卷绕后由焊料钎焊密封的薄壁软管。金属软管所用钢带多为镀锌钢和不锈钢。有时软管外还有用钢丝编织的套网。主要产品和用途有：镀锌金属软管，作电线保护管；普通不锈钢软轴套管，用于自动化仪表的电线保护管；P3型吸尘器软管，用于通风吸尘设备的管道及输送散体物质等；P3型冷冻油嵌线软管，作航空工业及其他防湿要求高的导线保护套管；吸粮软管，作输送粮食、木屑、黄砂及碎石等管道；P2型耐压软管，输送中性液体、气体、散体物质及其混合物质；钎焊不锈钢软管，作电缆的防护套及非腐蚀性液、气等系统的输送管道；滚焊不锈钢软管，用于航空和其他装备上非腐蚀性液、气系统的输送管道。
CAS号：
性质：由钢带卷绕制成或卷绕后由焊料钎焊密封的薄壁软管。金属软管所用钢带多为镀锌钢和不锈钢。有时软管外还有用钢丝编织的套网。主要产品和用途有：镀锌金属软管，作电线保护管；普通不锈钢软轴套管，用于自动化仪表的电线保护管；P3型吸尘器软管，用于通风吸尘设备的管道及输送散体物质等；P3型冷冻油嵌线软管，作航空工业及其他防湿要求高的导线保护套管；吸粮软管，作输送粮食、木屑、黄砂及碎石等管道；P2型耐压软管，输送中性液体、气体、散体物质及其混合物质；钎焊不锈钢软管，作电缆的防护套及非腐蚀性液、气等系统的输送管道；滚焊不锈钢软管，用于航空和其他装备上非腐蚀性液、气系统的输送管道。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条