说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 磨损性,耐磨性
1)  wearability [英][,wɛərə'biliti]  [美][,wɛrə'bɪlətɪ]
磨损性,耐磨性
2)  Wear Resistance
耐磨损性
1.
Effect of the carbon nanotube diameter on wear resistance of MWCNTs/PMMA composite system with four diameters was studied in this paper.
研究了具有四种不同碳纳米管径的MWCNTs/PMMA复合物系的耐磨损性。
2.
The effects of TiC particles on mechanical properties and wear resistance of 2A50 Al matrix were studied.
研究了TiC对材料力学性能及耐磨损性能的影响。
3.
Posterior composite resin is used to restore cavities involving stress bearing areas and is required to show high compressive strength,flexure strength, fracture toughness and wear resistance.
后牙复合树脂(posterior composite resin)是指用于涉及到牙齿牙合面修复的材料,要求具有较高的抗压强度、弯曲强度、断裂韧性和耐磨损性。
3)  abrasive wear resistance
耐磨料磨损性能
1.
Its abrasive wear resistance was investigated,and surface hardness as a function of impact energy was measured.
5 m球磨机设计了一种低合金钢,研究了其耐磨料磨损性能,并测定了高锰钢表面硬度随冲击功的变化曲线;在冲击功不高的情况下,该钢的耐磨性能比高锰钢好,完全适合于湿式中小型球磨机的使用工况。
4)  wear resistance
耐磨损性能
1.
The effect of content of SiC nano-powders on the microstructure,mechanical properties and wear resistance of nodular cast iron was investigated.
采用改性纳米SiC粉体对球墨铸铁进行了强韧化处理,研究了不同的纳米SiC粉体加入量对球墨铸铁的微观组织、力学性能以及耐磨损性能的影响。
2.
Cermet cladding material is a new kind of material with high wear resistance,which is qualitatively and quantitatively studied by many researchers.
金属陶瓷硬质涂覆层材料是一种具有高耐磨性能的新型覆层材料,许多学者对其耐磨损性能进行了定量和定性研究。
3.
It showed that the sho ck strength, the wear resistance,the tension strength of nano-SiC/PA66 were be st when the content of nano-SiC/PA66 were 10%,3%.
讨论了纳米SiC对PA66耐磨损性能的影响 ,结果表明 :当纳米SiC含量分别在 1 0 %、3%时 ,纳米SiC/PA66复合材料的冲击性能和耐腐蚀性能以及拉伸性能最好 ;并通过扫描电镜对PA66和纳米SiC/PA66的结构进行表
5)  wearing capacity
磨损量;耐磨性,抗磨性
6)  corrosion wear resistance
耐腐蚀磨损性
补充资料:连续性与非连续性(见间断性与不间断性)


连续性与非连续性(见间断性与不间断性)
continuity and discontinuity

11an父ux泊g四f“山。麻以角g、.连续性与非连续性(c。nt,n琳t:nuity一)_见间断性与不间断性。and diseo红ti-
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条