1) impact extrusion
冲击挤压加工
2) impact extrusion
冲击挤压
1.
Hazelett strip casting process is already successfully used for producing slug for impact extrusion.
哈兹列特铝板带连铸连轧工艺已被成功地用于铝和铝合金冲击挤压用坯料的生产。
3) impact extrusion press
冲击挤压机
4) extrusion
[英][eks'tru:ʒən] [美][ɛk'struʒən]
挤压加工
1.
Primary study on coffee substitute prepared by extrusion of wheat germ and soybean
大豆和麦胚芽挤压加工咖啡替代物的初步研究
2.
This paper mainly discussed the effects of nutritional properties on extrusion process,and described the effects of extrusion process parameters such as feed speed,feed moisture content,barrel temperature on protein,starch,fat,vitamins,available lysine,activity of urease,revealed the effects of extrusion process on nutritional quality from another perspective.
分析挤压加工过程中,挤压工艺参数对食品营养品质的影响。
3.
Triturated food prepared by extrusion of wheat germ and cornmeal was studied with referent indexes of sensory characteristics.
结果表明:麦胚芽经挤压加工后粗纤维含量下降达46。
5) extrusion process
挤压加工
1.
This article compares extrusion process with conventional processes in some peducts .
本文通过将挤压蒸煮方法与传统加工方法在一些产品的加工方面进行对比，显示了挤压加工的优势和经济性，指出食品挤压加工是今后食品工业发展的一个方向。
2.
A kind of aluminum alloy profile with high conductivity and high yield strength was produced by extrusion process test,its conductivity is up to 60%IACS,yield strength(σ0.
用正交试验法对比分析了纯铝合金中添加Fe、Cu、Mg、Zn对其电导率及屈服强度的影响程度;并由此进行成分配比,通过挤压加工试验,研制生产出一种高电导率高屈服强度铝合金型材,H112状态电导率达60%IACS左右、屈服强度σ0。
6) extruding processing
挤压加工
1.
The influence of extruding processing on the water retention capacity of insoluble diet fiber(IDF)was studied and the optimum parameters were obtained:material water content 30%;processing temperature 140 ℃;screw speed 100 r/min.
为此,研究了挤压加工对米糠中IDF持水力的影响,并获得了最优挤压加工参数组合为:原料含水量30%,挤压温度140℃,螺杆转速100r/min。
补充资料：冲击挤压(见冷挤压)
冲击挤压(见冷挤压)
impact extrusion
ehongji jiya冲击挤压(impaet extrusion)见冷挤压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条