说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 扩散内耗
1)  Diffusion internal friction
扩散内耗
2)  dispersion loss
扩散损耗
3)  internal dissipation
内耗散
1.
The battery model with the internal dissipation is used to analyze the performance characteristics of an electric battery at the maximum work output.
一个具有内耗散的电池模型被用来分析电池在最大输出功时的性能特性 。
4)  internal diffusion
内扩散
1.
Effect of internal diffusion on thiophene hydrodesulfurization in pyrolysis gasoline;
内扩散对裂解汽油中噻吩加氢脱硫反应的影响
2.
The influence of internal diffusion on alkylation under the influence of external diffusion being eliminated was investigated.
本文对长链烯烃与苯在磷和镧改性的USY沸石分子筛上的烷基化反应进行了研究 ,考察内扩散阻力对烷基化反应的影响 ,建立了带内扩散阻力的反应动力学方程 ,通过数据拟合确定了动力学参数 ,得到反应动力学模型。
5)  pore diffusion
孔内扩散
1.
The film and pore diffusion model was used to analyze the diffusive mass transfer of EM in both mentioned resins.
采用液膜及孔内扩散模型,模拟不同温度和不同红霉素(EM)初始浓度条件下,大孔吸附树脂HZ816及XAD16吸附红霉素的动态吸附曲线,并获得液膜传质及孔内扩散系数;考察了温度及溶质浓度对红霉素在两种树脂中吸附动力学的影响。
2.
With the film mass transfer,porous diffusion and axial dispersion were taken into account,and a film and pore diffusion model was employed to describe the diffusive mass transfer of .
并采用基于液膜及孔内扩散模型的动力学模型,同时考虑吸附树脂颗粒内外扩散阻力及轴向扩散的影响,研究了固定床上红霉素在大孔吸附树脂中的吸附动力学,并从穿透曲线回归得到液膜传质系数孔内扩散系数。
6)  Internally diffusing Sn
内锡扩散
补充资料:-戊内酯、3-甲基丁内酯、咖吗-戊内酯
CAS: 108-29-2
分子式: C5H8O2
分子质量: 100.12
沸点: 207-208℃
熔点: -31-208℃

中文名称: 4-戊内酯、γ-戊内酯、3-甲基丁内酯、咖吗-戊内酯

英文名称: dihydro-5-methyl-2(3H)-Furanone、dihydro-5-methyl-2(3h)-furanon、4-hydroxypentanoic acid lactone、4-hydroxyvaleric acid lactone、4-methyl-gamma-butyrolactone、gamma-methyl-gamma-butyrolactone、gamma-valerolakton

性质描述: 无色至微黄色液体。凝固点-31℃,沸点205-206.5℃,83-84℃(1.73kPa),相对密度(25/25℃)1.0578,折光率(nD25)1.4301。能与水、许多有机溶剂、树脂和蜡等混溶。10%水溶液的pH为4.2。

生产方法: 由不饱和羧酸通过闭环反应来合成,例如乙酰乙酸与硫酸共热,或乙酰丙酸在镍、铜等催化剂存在下加氢。

用途: γ-戊内酯有较强的反应能力,可用作树脂溶剂及各种有关化合物的中间体。也用作润滑剂、增塑剂、非离子型表面活性剂的胶凝剂、加铅汽油的内酯类添加剂,用于纤维素酯和合成纤维的染色。γ-戊内酯具有香兰素和椰子香味。我国GB2760-86规定为允许使用的食用香料。主要用以配制桃、椰子、香草等型香精。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条