说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 恒空气流量
1)  constant air flow
恒空气流量
2)  air flow
空气流量
1.
In order to solve these problems,this paper analyzed the application of the multi-sensors information fusion technology in air flow test system and proposed a way to design multi-sensors air flue test system based on LabVIEW.
在传统的空气流量测试系统中,存在着测试精度低、工作量大等问题。
2.
In order to keep the stability of idle speed with better control for the air flow in idle speed mode,a driver circuit of stepper motor is designed in this paper,according to the working theory of idle control device using stepper motor,and the idle device is controlled by a board based Digital Signal Processor(DSP) which integrates the driver circuit.
为了更好地控制怠速空气流量,以保持发动机的怠速稳定性,根据步进电机式怠速控制阀的工作原理设计了步进电机的驱动电路,并使用基于数字信号处理器(DSP)的已集成该驱动电路的控制电路板对怠速阀进行控制。
3.
The flow field of the core engine inlet was numerically calculated to solve the problem that the air flow measured in the air simulated test facility was inconsistent with ground test.
针对某型核心机地面台和高空台试验中空气流量测量不一致的问题,开展了核心机进口流场的数值计算分析和试验研究。
3)  air flowrate
空气流量
1.
Analysis and evaluation of measurement uncertainty of air flowrate with nozzle
喷嘴式空气流量测量不确定度分析与评定
2.
In this paper,the developing situations of domestic and foreign air flowrate measuring technology are discussed,different inspection patterns are com pared and analyzed,and some personal views are put forward.
汽油机进气量的准确计量是其电控喷油系统实现空燃比精密控制的基础,文中系统综述了空气流量测量技术的国内外发展状况,对各种不同流量检测方式进行了对比分析,并提出了见解。
3.
Introduced is the experiment by a differentialthermo-balance for characteristics of coal used for blast furnace injection at programmed rate of temperature elevation and various air flowrate;influence on ignition weight loss and characteristic temperature at different rate of temperature elevation and air supply analyzed.
介绍了利用差热分析天平,采用程序升温法对高炉喷吹煤在不同升温速率和空气流量下的燃烧性能进行的实验,分析了升温速率和空气流量对失重率和燃烧特征温度的影响。
4)  air flow rate
空气流量
1.
For it is difficult to measurement the air flow rate on the medium and large duty marine diesel engines,the emission testing experiments were carried out on small duty marine diesel engines.
鉴于用空气流量法测量大中型船用柴油机废气排放较困难,考虑以小型船用柴油机为对象进行排放测试研究。
2.
Through experiments of changing the inlet air flow rate,we can adjust the hot air outlet temperature as high as possible,which helps to reduce the heat loss and improve the collector efficiency.
通过改变集热管进口空气流量来获得尽可能高出口温度的热空气,从而降低热损系数,提高集热效率。
5)  air flow rate
空气流量;气流率
6)  air flow
气流,空气流量
补充资料:理想流量计试探与流量仪表的选用
理想流量计试探
  
  1.检测件无阻碍物;
  2.检测件可夹装在管道外部,可随意移动在任何地点测量而无须截断管道与流体;
  3.仪表的流量计算方程简单明确,可外推到未知领域而无须实流校验;
  4.频率脉冲输出信号,数字式仪表,便于远传抗干扰及与计算机联网;
  5.仪表输出信号不受流体介质物性的影响;
  6.仪表输出信号不受流体流动特性的影响;
  7.仪表复现性高;
  8.仪表范围度宽,线性好;
  9.仪表可靠性高,价格适宜,维修技术不复杂;
  10.无须个别实流校验,或只须“干校”,或在一、二种介质中校验可推广到各种介质;
  11.检测件输出信号直接反映质量流量。

  可以说至今并没有出现上述的理想流量计,所有流量计都多少具备一些上述条件,只不过有的多些,有的少些。所有流量计制造厂试制新产品都力图能更多地具备上述条件。


流量仪表的选用
  
   流量仪表的选型对仪表能否成功使用往往起着很重要的作用,由于被测对象的复杂状况以及仪表品种繁多,产品质量难以掌握等情况,使得仪表的选型感到困难。没有一种十全十美的流量计,各类仪表都有各自的特点,选型的目的就是在众多的品种中扬长避短,选择自己最合适的仪表。

   一般选型可以从五个方面进行考虑,这五个方面为仪表性能方面、流体特性方面、安装条件方面、环境条件方面和经济因素方面。五个方面的详细因素如下:  

  1.仪表性能方面

  准确度、重复性、线性度、范围度、流量范围、信号输出特性、响应时间、压力损失等;

  2.流体特性方面

  流体、温度、压力、密度、粘度、化学腐蚀、磨蚀性、结垢、堵塞、混相、相变、电导率、声速、导热系数、比热容,等熵指数;

  3.安装条件方面

  管道布置方向,流动方向,检测件上下游侧直管段长度、管道口径、维修空间、电源、接地、辅助设备(过滤器、消气器)、安装、脉动等;

  4.环境条件方面

  环境温度、湿度、电磁干扰、安全性、防爆、管道振动等;

  5.经济因素方面

  仪表购置费、安装费、运行费、校验费、维修费、仪表使用寿命、备品备件等。


  仪表选型的步骤如下:

  1. 依据流体种类及五个方面考虑因素初选可用仪表类型(要有几类型以便进行选择);
  2. 对初选类型进行资料及价格信息的收集,为深入的分析比较准备条件;
  3. 采用淘汰法逐步集中到1-2种类型,对五个方面因素要反复比较分析最终确定预选目标。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条