说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> SAE内螺纹
1)  sae int thd
SAE内螺纹
2)  sae thread
SAE螺纹
3)  sae straight thread port
SAE直螺纹孔口
4)  sae o-ring male thread union
SAE 装O型环的阳螺纹管接头
5)  inner thread
内螺纹
1.
The product with inner thread and its mould structures are analyzed.
对带内螺纹的塑料制品及其模具结构进行分析,采用自动卸螺纹和压缩空气二次顶出相结合的结构较紧凑的脱模机构。
2.
The practical measuring of incomplete inner thread,using the screw gauge and the special fixture is introduced in this article.
结合生产实例介绍了一种利用定制螺纹通止规和夹具测量不完整内螺纹的方法,并讨论了相关结构的加工精度对测量结果的影响,此方法解决了常规测量法(螺纹通止规)无法用于不完整内螺纹检测的问题。
3.
The technological process for forming the bathroom plastic part with inner thread and the structure of the injection mould for forming the part were analyzed.
介绍了一个带内螺纹的卫浴塑件成型工艺及注射模结构 ,注射模采用液压油缸直线抽芯与丝杆棘轮旋转抽芯相结合的脱模机构 ,提高了生产效
6)  internal thread
内螺纹
1.
Development of demolding mechanism for plastic part with internal thread;
带内螺纹塑件的新型脱模机构设计
2.
Study on Processing Method for Cold Extrusion in Internal Thread of Knuckle Axis;
挂钩轴内螺纹冷挤压成形方法研究
3.
An injection mould for a plastic bottle cap with internal thread was developed,in which a screw drive mechanism was designed for the automatic stripping of internal thread.
分析了注射螺纹自动脱模机构,针对带有内螺纹的瓶盖,设计了利用螺旋传动自动脱内螺纹的注射模。
补充资料:内螺纹卡扎里密封
分子式:
CAS号:

性质:内螺纹卡扎里密封的密封原理与外螺纹的基本相同,只是将带螺纹的端盖直接旋入带有内螺纹的筒体端部内。密封垫置于端盖与筒体端部连接交界处,其上有压紧环,通过压紧螺栓使密封垫的内侧面和底面分别与端盖侧面和筒体端部顶面紧密贴合实现密封。它比外螺纹卡扎里密封省去了一个较难加工的螺纹套筒,结构稍为简单,但它的端盖加厚,螺纹易受介质腐蚀,装卸不方便,零件较多,一般用于小直径的高压容器上。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条