1) Battery factory
蓄电池厂
2) battery
蓄电池
1.
Analysis of battery activation of hardware electric circuit based on combinatory charging method;
基于组合充电法的蓄电(池)激活硬件电路研究
2.
Design of controller with ultracapacitor-battery hybrid energy on a stand-alone PV system;
超级电容器-蓄电(池)应用于独立光伏系统的储能设计
3.
Design and Implementation of a Battery On-Line Monitoring System Based on GPRS;
基于GPRS的电力系统蓄电(池)在线监测系统的设计与实现
3) storage battery
蓄电池
1.
Study of an energy saving device for storage battery charge or discharge;
一种节能型蓄电(池)充放电装置的研究
2.
The Invalidation Modes and Effective Measures of the Sealed Valve Regulated Lead Acid Stationary Storage Battery;
阀控密封铅酸蓄电(池)(VRLA)的失效模式及采取的有效措施
3.
Capacity calculation for storage battery of Taisha substation;
太沙变电所蓄电(池)容量的计算
4) Accumulator
蓄电池
1.
Accumulator and Direct Current System Operation;
蓄电(池)和直流系统的运行
2.
Study and Design of New Discharge Vehicle for Accumulator;
蓄电(池)用新型放电车的研究与设计
3.
SRD Power Convertor s Design Supplied Power by Accumulator;
基于蓄电(池)供电的SR电机功率变换器设计
5) storage battery
蓄电池式
6) waste accumulator
废蓄电池
7) Lead acid battery
铅蓄电池
1.
Study on the utilization of positive active mass in lead acid battery;
铅蓄电(池)正极活性物质利用率
2.
Study of additives for tubular positives in lead acid battery;
铅蓄电(池)管式正极活性物质添加剂的研究
3.
The effects of chargers on battery performance and the research status of charge regimes for EB lead acid battery were reported too.
简要介绍了国内电动自行车和电动自行车用铅酸动力电池的发展情况以及铅酸动力电池的最新发展技术,即水平铅布蓄电(池)、卷绕式铅酸蓄电(池)以及胶体电池;同时介绍了电动自行车用铅蓄电(池)的充电器和充电模式方面的进展状况;针对电动自行车对电池所提出的要求,指出铅蓄电(池)只要提高比能量、循环寿命及快充能力,凭借其优良的性能价格比,仍然是现阶段电动自行车以及电动汽车的首选电源。
8) storage battery shell
蓄电池壳
1.
The technological parameter for typical alkaline storage battery shell made from MBS was introduced,and the defects,reasons and solving methods of MBS battery shell were discussed.
从工艺特性、模具设计、制品设计等方面探讨了(甲基丙烯酸甲酯/丁二烯/苯乙烯)共聚物(MBS)制品的注射成型技术,结合典型MBS碱性蓄电(池)壳介绍了注射成型中的各种工艺参数,并对MBS蓄电(池)壳加工中的缺陷、原因及解决方法进行了论述。
9) lead accumulator
铅蓄电池
1.
The paper introduces ingredients of waste lead accumulator and effective way of produceing lead alloys and lead salt.
本文介绍了废铅蓄电(池)的组成和用以制取铅合金及铅盐的有效方法。
2.
Abnormal operation and failure in lead accumulator mainly involves increase and decrease of electrolyte,sulphidization,bend,rupture,short circuit,reversed pole of pole-plate,excessive separation of active substance,impure electrolyte,increase of internal resistance and overcharge of accumulator.
铅蓄电(池)常见的不正常运行和故障主要有电解液量减少或增多、极板硫化、极板弯曲、断裂、短路、反极、活性物质过量脱离、电解液不纯、内阻增大、电池过充等。
3.
The article explained the relation of lead accumulator e.
阐述了铅蓄电(池)电动势与放电强度及放电时间的关系、铅蓄电(池)电解质密度与放电强度及放电时间的关系,提供了一系列试验数据,对设计大功率铅蓄电(池)有一定参考价值。
10) lead-acid battery
铅蓄电池
1.
Research on lead-fiber grid wound lead-acid battery for electric bicycles;
电动自行车用铅布卷绕铅蓄电(池)的研究
2.
Analysis of safe transportation tests for the lead-acid battery;
铅蓄电(池)安全运输试验分析
3.
Present situation and prospect of the lead-acid battery market in China;
中国铅蓄电(池)的市场现状与展望
补充资料：蹙蓄
1.蓄聚，积累。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条