1) trapezoidal girder
梯形箱梁
2) thin-walled box beams
等截面梯形箱梁
1.
Cosine functions are supposed to simulate the longitudinal displacement of thin-walled box beams when bended.
假定箱梁的纵向位移沿横截面满足余弦函数分布,考虑荷载沿横向的作用位置的影响,采用广义变分原理推导出了等截面梯形箱梁发生对称挠曲时的剪力滞效应表达式,并与三次抛物线法的计算结果进行对比,证明了计算假定的合理性。
3) inverted trapezoidal box girder
倒梯形展翅箱梁
1.
It is an inverted trapezoidal box girder and single-box 5-chamber structure.
南通市城闸大桥主桥为142m+110m+45m+45m独塔中央单索面预应力混凝土斜拉桥,倒梯形展翅箱梁,单箱五室结构,桥面宽为34m。
4) trapezoid multi-cellular box girder
梯形多室箱梁
1.
Then a elastically supported frame analysis model of trapezoid multi-cellular box girder is built.
在此利用虚拟框架法,获得箱梁截面的位移变形及横向内力,通过反算得到箱梁对虚拟框架的弹性支承刚度,建立梯形多室箱梁的弹性支承框架分析模型。
5) trapezoidal thin-walled box girder
梯形薄壁箱梁
1.
Based on the energy variation principle,this paper proposes an approach to analysis of shear lag effect,shear deformation and rotational inertia on the dynamic characteristic of trapezoidal thin-walled box girders generally used in engineering.
以能量变分原理为基础,设置3个不同的剪滞纵向位移差函数以准确反映薄壁箱梁不同宽度翼板的剪滞变化幅度,在综合考虑剪力滞后、剪切变形及转动惯量效应的基础上,提出一种能对工程中常用的梯形薄壁箱梁自振特性进行分析的方法。
6) trapezoidal box girder
梯形截面箱梁
1.
In this paper, the aberration of trapezoidal box girder is analysed according to the internal force equilibrium and deformation coordination of its box cross-section when unsymmetical load is applied to the girder.
对梯形截面箱梁在偏载作用下发生的畸变进行了分析,并在此基础上导出了梯形截面箱梁畸变惯性矩的计算式,可用此方法计算其畸变应变能。
补充资料：ANSYS壳单元分析箱梁
! Analysis a box beam section with shell elements of ANSYS
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条