1) screw extruder
螺杆式挤出机
2) screwless extruder
无螺杆式挤出机
3) screw extruder
螺杆挤出机
1.
Design of electric control system of screw extruder for tread wrapping production line;
胎面缠绕生产线螺杆挤出机电气控制系统的设计
2.
Thermal Entrance Effect in the Lubrication Clearance of a Screw Extruder;
螺杆挤出机润滑间隙内温度入口效应
3.
Study on optimizing design of screw extruders and it's application
螺杆挤出机优化设计的现状及发展
4) extruder
[eks'tru:də]
螺杆挤出机
1.
Ih this article, the author points out the necessity, methods and effects of technical reform on transmission system of the extruder with the frequency - varying controlling technics.
提出了用变频控制技术改造螺杆挤出机传动系统的必要性，改造方法和效果。
2.
The reclaiming mechanism and the technological process of extruder reclaiming process for producing reclaimed rubber were reviewed.
简介了螺杆挤出法生产再生胶的工艺原理、再生过程，以及由美国再生胶公司和沈阳化工学院开发的螺杆挤出机的结构特点和设计参数。
5) reciprocating pin-screw extruder
往复式销钉螺杆挤出机
1.
Especially the structural characteristics and application fields of co-rotating twin-screw extruder,reciprocating pin-screw extruder and series disc-screw extruder developed recently are introduced.
重点介绍了同向平行双螺杆挤出机、往复式销钉螺杆挤出机和串联式磨盘螺杆挤出机的结构特点、设计原理、混炼机理和应用领域。
2.
Based on the experiments,the extrusion system of a reciprocating pin-screw extruder is analyzed,the mixing principle is presented,the differences among the reciprocating pin screw extruders and single-screw extruders and twin-screw extruders are given.
结合研制实践 ,分析了往复式销钉螺杆挤出机挤压系统的特点 ,阐述了该类机型的混合机理 ,并与常规的单、双螺杆挤出机作了比
6) series disc-screw extruder
串联式磨盘螺杆挤出机
1.
Especially the structural characteristics and application fields of co-rotating twin-screw extruder,reciprocating pin-screw extruder and series disc-screw extruder developed recently are introduced.
重点介绍了同向平行双螺杆挤出机、往复式销钉螺杆挤出机和串联式磨盘螺杆挤出机的结构特点、设计原理、混炼机理和应用领域。
2.
Based on the development practice of CPJ-75/135 series disc-screw extruder,the kneading factors(compression,shearing,displacement) were analyzed.
结合新型混炼装备CPJ 75/135型串联式磨盘螺杆挤出机的开发研制实践,分析了混炼过程压缩、剪切和置换三要素,从混炼机理、输送原理、温度和剪切变形总量的控制等角度阐述了串联式磨盘螺杆挤出机的核心部件———磨盘的设计原理。
3.
In this paper, based on analyzing three kneading factors, the kneading mechanism of series disc-screw extruder developed was studied.
通过混炼三要素的分析,对自行开发研制的串联式磨盘螺杆挤出机的混炼机理进行了研究,以聚合物/纳米无机物体系混炼为结合点,与同向平行双螺杆混炼挤出机的混炼效果进行了对比,实验结果表明,该机种具有极好的混炼性能,在高聚物混炼加工领域中具有十分广阔的应用前景。
补充资料：无螺杆式挤出机
分子式：
CAS号：
性质：不使用螺杆的挤出机的总称。可靠齿轮泵、柱塞等机械产生挤出压力或靠韦孙伯格效应(Weissenberg effect)产生挤出压力。后者的主要代表如弹熔体挤出机。
CAS号：
性质：不使用螺杆的挤出机的总称。可靠齿轮泵、柱塞等机械产生挤出压力或靠韦孙伯格效应(Weissenberg effect)产生挤出压力。后者的主要代表如弹熔体挤出机。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条