1) Hide processer
倾斜转古
2) paleotilt
古倾斜
3) tilted rotation
倾斜旋转
1.
This paper reviewed the rotary e-lectroplating from the aspects of different rotating ways such as horizontal, vertical, and tilted rotation.
对水平旋转、垂直旋转、倾斜旋转三种旋转电镀方式在生产中的应用分别进行了阐述。
4) Lean-revolve method
倾斜回转
1.
The new method——lean-revolve method is designed for the laser precise drilling of ceramic material, in which the work piece or the laser beam is inclined with some certain degree and the work piece is revolv.
为解决这一问题介绍了陶瓷激光精密打孔的新方法——倾斜回转法。
5) bank-to-turn
倾斜转弯
1.
Against the character of the hypersonic vehicle bank-to-turn nonlinear controller,a more effective control method for nonlinear system was applied,which was nonlinear dynamic inversion technique.
高超声速飞行器的气动特性比一般的飞行器更为复杂,选用BTT(Bank-to-Turn)技术,即倾斜转弯技术可以满足其对于气动外形的要求,但随之给动力学系统带来了快时变、严重非线性及强烈耦合的特点。
2.
The design project of surface-to-air missiles offered in this paper which adopts a ramair engine and bank-to-turn(BTT) control technology has the property of a long range and high maneuverability.
为了满足远程高机动性要求,提出了将冲压发动机和倾斜转弯(BTT)控制技术应用于某型地空导弹的设计方法。
3.
A method of designing a bank-to-turn(BTT) flight control system of unmanned aerial vehicle(UAV) was studied to solve the problems cause by kinematics coupling,aerodynamic nonlinearity and parameter uncertainty.
研究无人机(UAV)的倾斜转弯(BTT)飞行控制系统的设计方法,解决UAV高机动倾斜转弯飞行时运动强烈耦合、气动特性强非线性和参数非定常性等特性带来的飞行控制系统设计难题。
6) BTT
倾斜转弯
1.
Bank-To-Turn (BTT) and Skid-To-Turn (STT) control techniques are widely used in current missile control systems.
现代导弹控制技术一般可分为侧滑转弯(Skid-to-Turn，STT)控制技术和倾斜转弯(Bank-to-Tum，BTT)控制技术。
2.
Bank-to-Turn (BTT) control technology has aroused wide concern among researchers in the design of the long-range guided weapons, powered by ramjet, with symmetrical structure.
倾斜转弯(BTT:Bank-to-Turn)控制技术在远程、采用冲压发动机、弹体具有面对称结构的制导武器的设计中受到了科研人员的广泛关注。
3.
Focused on the problem of reusable launch vehicle(RLV) attitude control,an engineering attitude control system based on the classical control theory and BTT technology was designed.
基于古典控制理论和BTT倾斜转弯控制技术,设计了可重复使用运载器(RLV)的大气层内姿态稳定控制系统。
补充资料：旋转-旋转式扫描系统
旋转-旋转式扫描系统
影像学术语。CT设备的类型之一。扫描方式为旋转-旋转式(rotate-rotate，R/R)的CT设备。扫描时X线管和排列成扇形的探测器阵列做同步旋转，属第三代CT机，可用于全身CT检查，是70年代后期以来临床应用的主流机型之一。X线管为旋转阳极，发射大角度扇形线束，探测器多为氙气电离室或为固体探测器，阵列规模通常在数百甚至上千。扫描时间1～4秒。通常具有靶扫描、靶重建、动态扫描、三维成像等特殊程序和多种重建算法、测量分析功能。旋转-旋转式设备在扫描过程中探测器是连续工作的，利用率高，但不能同时进行校准。所获取的每一幅投影轨迹剖面图都是由整个探测器阵列同时采集的信息构成的，个别探测器出现误差便可能使反投影后的重建图像上出现环形伪影(ring artifact)。该型机不具备体积采样能力。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条