说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 中线收缩
1)  centerline shrinkage
中线收缩
2)  centerline shrinkage
中心线收缩孔
3)  shrinkage center
收缩中心
1.
In order to gain a clear idea of the shrinking direction of injection molding products,the shrinkage mechanism is analyzed and,thereby,a concept of shrinkage center is derived.
本文针对注塑模具设计中存在的注塑制品收缩方向含混不清的问题 ,通过分析注塑成型制品的收缩机理 ,提出“收缩中心”的概念 ,建立能够对实际收缩情况进行合理解释的收缩规则 ,并据此开发了预测注塑成型制品收缩率分布趋势的程序 ,计算结果与实验结果吻合较好。
4)  linear shrinkage
线收缩率
1.
The effects of pyrolysis temperature and soaking time on ceramic yield,linear shrinkage,mechanical properties and microstucture were investigated.
研究了热懈温度和保温时间对陶瓷产率、线收缩率、力学性能以及微观结构的影响。
2.
The effects are investigated of nano-Al_2O_3powder additive on sintering behaviors of alumina ceramics,such as volume density,water-absorbing rate,porosity,linear shrinkage.
研究了纳米A l2O3粉添加对粗晶氧化铝陶瓷烧结行为,如体积密度、吸水率、气孔率、线收缩率的影响。
3.
The microstructures and properties such as linear shrinkage, ceramic yield and flexural strength of active filler Al_containing polycarbosilane(PCS)_derived ceramics pyrolyzed at different temperatures were investigated.
研究了裂解温度对活性填料Al-聚碳硅烷裂解陶瓷的线收缩率、陶瓷产率、力学性能等的影响 。
5)  line contraction percentage
线收缩率
1.
The effects of solidified agent, nanometer silicon dioxide powder and calcium carbonate powder on line contraction percentage of silicon rubber mould were discussed in this paper.
本文主要研究了固化剂、纳米二氧化硅粉和碳酸钙粉等外加剂对硅橡胶模具线收缩率的影响。
2.
The line contraction percentage of the sintered samples were investigated.
通过在原料中添加磷酸盐玻璃粘接剂改善HA生物陶瓷的烧结性能,测定试样的线收缩率,研究了粘接荆对HA植入体烧结的影响。
6)  Linear Contraction
线收缩
1.
Development of alloy linear contraction tester with Singlechip Microcomputer;
微机化合金线收缩仪的研制
2.
The effect of rare earth La and Ce on fluidity,free-linear contraction and heat tearing tendency of ZL201 was studied.
研究了稀土La和Ce的加入对ZL201合金流动性、自由线收缩、合金热裂倾向的影响。
3.
Two types of asphalt mixtures with different gradations(AC-13,SMA-13,PA-13) are chosen to study fatigue behavior and linear contraction of asphalt mixture at low temperature in this study.
本文针对高寒地区沥青路面低温开裂现象,选取两种沥青和AC-13、SMA-13、PA-13等三种不同级配混合料进行四点弯曲疲劳、线收缩试验,研究了不同材料及级配对低温下沥青混合料的疲劳性能及收缩性能的影响。
补充资料:收缩中(晚)期喀喇音-收缩晚期杂音综合征


收缩中(晚)期喀喇音-收缩晚期杂音综合征


即"二尖瓣脱垂-喀喇音综合征"。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条