1) sump suction tube
池吸管
2) Siphon Filter
虹吸滤池
1.
Analysis on Leaving out Sand and Accumulating Mud of Siphon Filter;
虹吸滤池漏砂与积泥问题分析
2.
Technical modification of siphon filter in Zhuganshan Waterworks
竹竿山水厂虹吸滤池技术改造
3) sump
[英][sʌmp] [美][sʌmp]
吸水池
1.
Signal measurement and analysis of the flow in an open pump sump;
开敞式水泵吸水池内部流动的信号测量与分析
2.
Flows in open pump sumps are complex movements with free surface.
开敞式水泵吸水池内流动是具有自由表面的复杂流动。
3.
Air induced by entrained-vortex occurring in the pump sump can be absorbed into the pump, which can influence the operation stability of pump and reduce the pump performance.
水泵吸水池中可能会产生空气吸入涡,这些涡能够将空气带入水泵,影响水泵的运行稳定性,造成水泵的性能下降。
4) adsorption chamber
吸附池
1.
Design and discussion of gravity valveless active carbon adsorption chamber;
重力无阀式活性炭吸附池设计探讨
5) cistern
[英]['sɪstən] [美]['sɪstɚn]
吸水池
1.
The reasons which caused the circulation water pump s cavitation was discussed, Some suggestion was introduced, which include the cistern s dimersion and figure, water pipe, the physical chemical characteristic of the medium, the nesessary HPSH and cavitation NS of the pump etc.
从吸水池尺寸形状、进水管、抽送介质的物理化学特性、泵必需的汽蚀余量和汽蚀比转速等方面 ,讨论了循环水泵汽蚀产生的原因 ,并提出了改造方案。
2.
To the question of the frequent appearance of cavitations in the pumps used in the large scale waterworks, combining with the real working surroundings of pumps station in the Beijing Ninth Water Supply Plant, the cistern model by appropriate scale was set up, take advantage of the PIV measuring technology to measure and analyze the flow field in the cistern model.
针对大型自来水系统使用的供水泵空蚀严重问题 ,结合北京自来水九厂的实际情况 ,按比例制造了吸水池模型 ,采用 PIV测量技术测量和分析了该吸水池中水流流态。
补充资料：多层滤料滤池
分子式：
CAS号：
性质：一种下流式重力深床滤池。一般采用3种滤料，上层为无烟煤(粒径1～2mm)，中层为砂(粒径0.4～0.8mm)，底层为石榴石(粒径<0.5mm)。过滤速度为10m/h，反冲强度为48～72m/h。在对生物处理后的出水进行过滤时，需采取某种形式的辅助冲洗措施。
CAS号：
性质：一种下流式重力深床滤池。一般采用3种滤料，上层为无烟煤(粒径1～2mm)，中层为砂(粒径0.4～0.8mm)，底层为石榴石(粒径<0.5mm)。过滤速度为10m/h，反冲强度为48～72m/h。在对生物处理后的出水进行过滤时，需采取某种形式的辅助冲洗措施。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条