1) fluidization medium
流化介质
2) permeable medium
导流介质
1.
The effects of the factors such as permeable medium, peel ply on vacuum assistant resin infused (VARI) were studied.
研究了导流介质、脱模介质等工艺要素对真空辅助成型工艺的影响。
3) flow rate
介质流速
1.
By measuring the cooling curve and quench severity of quenching oil at various flow rates,the relationship among the hardening capacity,quench severity and flow rate was established.
对淬火油在不同流速下的冷却曲线和淬火烈度进行了测量 ,建立了硬化能力、淬火烈度与介质流速三者之间的关系。
2.
In order to investigate the heat transfer coefficient of quenching oil at different flow rates under practical condition, the doppler flowmeter was adopted to measure the flow rates in given quench tank.
结果表明 ,换热系数曲线能更好地反映表面热量传递的真实情况 ;随着介质流速的增加 ,换热系数的最大值呈增加趋势 ,当搅拌使介质中产生气泡时 ,介质的换热系数明显降低。
3.
In order to investigate the cooling characteristics and heat transfer coefficient of quenching oil at different flow rates under practical condition, the Doppler flowmeter had been adopted to measure the flow rates in given quench tank.
结果表明 ,随着介质流速的增加冷却特性曲线的冷速最大值及换热系数的最大值均呈增加趋势 ,当搅拌使介质中产生气泡时 ,介质的冷却能力明显降低。
4) seepage media
渗流介质
1.
The study on seepage media types for the development metaphase-late stage of Huo Shaoshan oil field;
火烧山油田开发中后期渗流介质类型研究
5) rheological medium
流变介质
1.
Copper monosalicylate CuSal(Sal= o -OC 6H 4CO 2) was synthesized by taking alcohol as rheological medium.
以乙醇为流变介质合成了一水杨酸铜CuSal(Sal =o -OC6 H4 CO2 ) 。
6) turbulent atmosphere
湍流介质
1.
Propagation of Bessel-correlated partially coherent hollow beams in the turbulent atmosphere;
部分相干空心光束在湍流介质中的传输特性
2.
Based on the extended Huygens-Fresnel principle,the expression for the spectrum of partially coherent electromagnetic beams in turbulent atmosphere is derived and numerical calculations are performed.
从推广的惠更斯-菲涅尔原理出发,推导出了部分相干电磁光束的光谱在湍流介质中传输的表达式,并以电磁高斯-谢尔模型(EGSM)光束为例,研究了湍流对电磁高斯-谢尔模型光束光谱的影响。
补充资料：导流筒
分子式：
CAS号：
性质：安装在搅拌釜内的构件。用它来控制返回流的速度和方向，以使被搅拌物系中确立某一特定的流型。对于螺旋桨搅拌器，导流筒套在叶轮的外面；对于涡轮搅拌器，导流筒置于叶轮的上方。在大型矿浆浸出槽中，用置于导流筒中的叶轮代替气流搅拌，可使能耗降低，并缩短了操作周期。
CAS号：
性质：安装在搅拌釜内的构件。用它来控制返回流的速度和方向，以使被搅拌物系中确立某一特定的流型。对于螺旋桨搅拌器，导流筒套在叶轮的外面；对于涡轮搅拌器，导流筒置于叶轮的上方。在大型矿浆浸出槽中，用置于导流筒中的叶轮代替气流搅拌，可使能耗降低，并缩短了操作周期。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条