1)  circular intensity differential scattering,CIDS
圆偏振差散射
2)  elliptical polarization
椭圆偏振
1.
It is introduced briefly the modification way and result of lignosulphonate(LS) as coal-water slurry(CWS) additive and determination of the adsorption film thicknesses of the LS and modified lignosulphonate(MLS) on the smooth surface of coal and microscopic slide by the method of elliptical polarization.
简要介绍了木质素磺酸钠(简称木钠,LS)用作水煤浆添加剂的改性方法及结果,并采用椭圆偏振法测定了木钠及改性木钠(MLS)在光滑的煤表面和载波片表面的吸附膜厚度,定量地对比了添加剂在固体表面吸附的空间位阻作用的大小。
2.
By discussing the problem of superposition of two linear polarized beams which are of the same frequency,of random vibrating directions and of the constant phase difference,the general expression of the coherent conditions and elliptical polarization is obtained.
通过对同频率、任意振动方向、相位差恒定的两列线偏振光波叠加问题的讨论,得到相干条件、椭圆偏振的一般表
3)  ellipse bias
椭圆偏置
1.
In wire-cutting manufacturing of the top and bottom different curve,accomplishing cutting way of ellipse bias changing curved surface which between two plane curve into developable surface in order to calculate NC program of four axis ganging.
在上下异型工件的线切割加工中,宜采用椭圆偏置切割法,即将上、下两平面曲线间的曲面变成可展直纹面,进而计算四轴联动的数控程序,可保障加工的效率与效益。
4)  Circularly polarized field
圆偏振场
5)  circular eccentric
圆偏心
1.
In view of the application of calculation formulae on clamping force of circular eccentric,this paper presents classification by self locking degree and corresponding calculation of clamping force.
针对圆偏心夹紧机构夹紧力计算公式的应用问题 ,提出了按圆偏心自锁程度不同的分类方式及其相应的夹紧力计算方法 ;分析比较了A、B两类偏心的夹紧特性 ,得出了前者优于后者的正确结论 ;讨论了标准偏心轮的偏心距及其公差取值的合理性问题 ,并提出了相应的修改建议 ,为正确设计和应用该机构提供了可靠的理论依
2.
By applying the circular eccentric clamping bodies clamping force formula,This paper brings forward the dif- ferent levels of classification of the self-locking round eccentric,and clamping force calculations.
通过应用圆偏心夹紧机构夹紧力计算公式,提出按圆偏心自锁程度不同的分类方式及其相应的夹紧力计算方法,突出了圆偏心轮在该夹紧机构中的重要性;进一步讨论圆偏心轮的偏心距的确定,并提出了其设计程序,为正确设计和应用该机构提供了可靠的理论依据。
6)  circularly-eccentric sheave
圆偏心轮
1.
Analysis of the force in circularly-eccentric sheave clamping system;
圆偏心轮夹紧机构的力分析
7)  circularly polarised modes
圆偏振模
1.
Withe the perturbation method,the analytical expressions ofthe fundamental mode field and the propagation constant are given,Two resultsare brought about:(1)the fundamental modes in a single-mode helical fiber areright-rotated and left-rotated circularly polarised modes.
结果表明:(1)单模螺旋光纤的基模是右旋和左旋圆偏振模;(2)螺旋光纤基模间的传播常数之差为2τ。
2.
Two important results are obtained: (1) The guided modes in abelical fiber are right-rotated or left-rotated circularly polarised modes.
从波动方程出发,直接在本地坐标系(Serret-Frenet框架)中研究了任何各向同性折射率分布的圆形芯弱导螺旋光纤导模的特性,得到两个重要的结论:(1)螺旋光纤的导模只能是右旋或左旋圆偏振模;(2)螺旋光纤不能传输TE模和TM模。
8)  Chaoborus sp
圆偏螺
9)  circular polarizing filter
圆偏振镜
1.
The paper analyzes the change of the exit light from a circular polarizing filter used inversely according to the interference theory of polarized light, measures the spectral transmittance curves with the combining of circular polarizing filter and linar polarizing filter, and summarizes the photographic performance of the circular polarizing filter used inversely.
根据偏振光干涉的原理 ,分析了摄影中反向使用圆偏振滤光镜时出射光随入射光及圆偏振镜旋转方位的变化情况。
10)  ellipsometry
椭圆偏振
1.
Because of the development of computer and numerical analysis,ellipsometry was improved rapidly,its application field was spread,and became more practical.
椭圆偏振测量技术是研究表面和薄膜的一种光学技术。
2.
Preliminary results on the real time monitoring of critical growth parameters by using ellipsometry and infrared pyrometry techniques were described.
报道了用椭圆偏振技术和红外辐射测温技术对HgCdTe生长关键参数实时监测的结果,建立了HgCdTe材料在生长温度下的标准光学常数数据库,在研究中对生长过程中材料的发射率以及红外辐射强度进行了理论分析,为生长温度的实时精确控制提供了理论依据,并在实验上获得了小于±1℃的生长温度控制精度。
3.
The inhibitive mechanisms were analyzed by polarization curves and ellipsometry method.
在海水体系中,用失重法测定了不同浓度水溶性壳聚糖及其降解产物对低碳钢的缓蚀效率,并用电化学方法和椭圆偏振法分析其缓蚀机理。
补充资料:椭圆偏振光
      光的电场方向或光矢量末端在垂直于传播方向的平面上描绘出的轨迹为一椭圆的偏振光。
  
  当两个相互垂直的振动同时作用于一点时,若它们的频率相同并且有固定的位相差,则该点的合成振动的轨迹,一般来说,呈椭圆形。自然光在晶体内所产生的寻常光(o光)和非常光(e光),虽属频率相同和振动方向相互垂直,但是,它们之间的位相差,即使在同一点,亦因时而异,不是固定的,所以这样的o光和e光的合成不能产生椭圆偏振光。
  
  然而,如果以一线偏振光代替自然光射到如图1所示的、光轴平行于晶面的单轴晶体的表面,并且令其振动平面与晶体光轴成一夹角θ,于是,在晶体表面上,振幅为A的线偏振光分解为振幅为Asinθ的o光和振幅为Acosθ的e光,并且此时o光和e光有相同的位相。当进入晶体内,o光和e光虽在相同的方向传播,但是传播速度不同,因而产生位相差
  式中n0和ne分别为该晶体对在真空中波长为λ0的o光和e光的主折射率,d为两者透过晶体的厚度。图2给出了由穿过不同厚度的o光和e光合成的光矢量末端的轨迹,除 δ=0和π外,都是椭圆形。这样的光就是椭圆偏振光,显然δ=0和π所对应的线偏振光可视为椭圆偏振光的特例;不难想到,当θ=45°时,与δ=π/2和3π/2对应的是圆偏振光。所以,图1所示的系统即为产生椭圆偏振光或圆偏振光的简单装置。
  
  为便于产生和分析各种椭圆偏振光,还需要有其他种产生椭圆偏振光的光学元件,巴俾涅补偿器和索累补偿器是其中最常见的两种。
  
  ①巴俾涅补偿器 如图3所示,是由光轴相互垂直的两块石英楔形板组成的复合棱镜,其中楔形板的折射角α 很小。当线偏振光垂直地射入补偿器时,在上楔板内,与图1所示的情况一样,线偏振光分解为o光和e光两部分,它们沿着同一方向传播,o、e两光的位相差δ1取决于它们在上楔板中所穿过的晶体厚度d1,但是在下楔板内,由于上、下两楔板的晶体光轴相互垂直,所以在上楔板内的o光和e光进入下楔板内就分别变成了e光和o光,它们间的位相差 δ2取决于它们在下楔板内穿过的晶体厚度d2,于是,透过巴俾涅补偿器的o光和e光的位相差为
  
  
  在巴俾涅补偿器内,当偏振光在两楔的中央穿过,d1=d2,则自补偿器出射的o光和e光之间位相差为零。当偏振光在上楔板中穿过的晶体厚度d1与在下楔板中穿过的晶体厚度d2不同时,则两光间产生一定的位相差。所以随着光通过楔板的不同水平位置,就能得到不同的位相差,也就是得到不同的椭圆偏振光。显然,为了使光束截面上各点的位相差相同,这种补偿器必须使用极细的光束,这是它的缺点。为了克服这一缺点,可以采用索累补偿器。
  
  ②索累补偿器 如图4所示,是由两个光轴平行的石英楔板和一个光轴垂直于两楔板光轴的石英平行平面板组成的复合棱镜。上楔板可由微动螺旋使其本身作平行的移动。当上楔板这样移动时,两楔板的总厚度可连续改变。当两楔板的总厚度等于下面石英平行平面板的厚度时,穿过补偿器的o光和e光之间位相差为零。由改变两楔板总厚度与石英平行平面板厚度之差即可得到较宽截面上有相同位相差的光束。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条