说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 活塞梢
1)  Piston Pin
活塞梢
2)  movable wing-tip
活动翼梢
3)  Plug (tappered)
螺塞(拔梢形)
4)  piston [英]['pɪstən]  [美]['pɪstṇ]
活塞
1.
Microstructure and Mechanical Properties of BH22 Piston Alloy in Squeezing Casting;
挤压铸造BH122活塞合金的显微组织与力学性能
2.
Research On Machining Principle For Non-Cylinder Piston Pin Hole Based on GMM;
基于GMM的活塞异形销孔加工原理研究
3.
Research on On-site Measurement of Middle-bulged Varying Ellipse Profile of Piston Skirt;
活塞裙部中凸变椭圆型面在位检测的研究
5)  pistons [英]['pistən]  [美]['pɪstṇ]
活塞
1.
Squeeze casting has been used for the shaping of comparatively large sized pistons made of hypereutectic aluminum-silicon alloys(silicon content between 16% to 20%).
采用挤压铸造的方法,作为尺寸较大的过共晶铝硅合金(含硅16%~20%)活塞的成型工艺。
2.
The authors study the wear curve of cutting tools and the surface roughness of motorcycle pistons on hypereutectic Al-22%Si alloy,and discuss the influence of several machining factors on the machinability of hypereutectic Al -22%Si alloy, such as the materials of tools, the geometric shapes of cutting blade and the machining parameter.
探讨了高硅铝AL—22%Si合金摩托车活塞切削加工时刀具的磨损规律和工件表面粗糙度的影响;讨论了刀具材料、切削刃几何参数和切削用量对该材料切削的影响规律。
3.
Compared with the conventional materials(ZL108,ZL109), SiCp/ZL108 composite has better physical and mechanical properties and is an ideal material for motorcycle pistons.
研究采用铸造旋涡法制造SiCp/ZL108复合材料的工艺,重点探讨铝液温度、颗粒表面处理及合金元素(Mg、B、Ti)对颗粒的回收率和分布的影响;与传统的活塞材料(ZL108,ZL109)相比,该材料具有优良的机械性能和物理性能,是摩托车活塞的理想材料。
6)  plunger [英]['plʌndʒə(r)]  [美]['plʌndʒɚ]
活塞
1.
Analysis on the quality problems of graphite coating of screen printing for plunger;
活塞丝网印刷石墨涂层质量问题分析
补充资料:翼梢小翼
      装在飞机机翼梢部的一组直立的小翼面,用以减小机翼诱导阻力。有单上小翼、上下小翼等多种形式的翼梢小翼。单上小翼由于结构简单而使用较多。飞机的诱导阻力约占巡航阻力的40%。降低诱导阻力对提高巡航经济性具有重要意义。机翼的展弦比越大,诱导阻力越小。过分大的展弦比会使机翼太重,因而增大机翼展弦比有一定限度。在翼梢简单地加装垂直端板也能减小诱导阻力,但效果并不理想。70年代中期,美国R.T.惠特科姆最先提出翼梢小翼的概念,一系列的试验证实了它的减阻效果。翼梢小翼除作为翼梢端板能起增加机翼有效展弦比的作用外,还由于它利用机翼翼梢气流的偏斜而产生的"拉力效应"能减小诱导阻力。风洞实验和飞行试验结果表明,翼梢小翼能使全机诱导阻力减小20%~35%,相当于升阻比提高7%。翼梢小翼作为提高飞行经济性、节省燃油的一种先进空气动力设计措施,已在一些小型运输机上开始采用。
  
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条