说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 基础振动半空间理论
1)  elastic half-space theory of foundation vibration
基础振动半空间理论
2)  the elastic half space theory of the dynamic foundation
动力基础半空间理论
1.
Based on the past research, this dissertation has analysed the relationship between the dynamic parameter and the self-property, then based on the elastic half space theory of the dynamic foundation and the theory of the vibration, this dissertation get the expression about the relationship between the vibration frequency and the porous ratio (density) of the double layer soil.
利用地基土的振动频率来测定土体的密实度是一项新的课题,本文在前人研究的基础上,分析了地基土的动力参数与土体本身性质之间的关系,应用动力基础半空间理论和振动学原理,得出了双层地基土的振动频率与土体空隙比(密实度)之间关系的计算表达式。
2.
By using the data of the experiment,this dissertation has analysed the relationship between the dynamic parameter and the self-property,then based on the elastic half space theory of the dynamic foundation,this dissertation get the method to measure the density of silt or sand subsoil using instantaneous implusion.
本文通过试验获得的数据,分析地基土的动力参数与土体的本身性质之间的关系,并应用动力基础半空间理论,得到了全新的利用瞬态锤击法来测定粉砂土的密实度的方法。
3)  half space theory
半空间理论
1.
It is based on the elastic half space theory for a dynamic machine foundation.
遵循动力基础的半空间理论 ,推演出基础刚性压力分布、柔性压力分布和抛物线压力分布的基础质量 静弹簧刚度 定值共振阻尼形式的基础竖向运动方程 ,并指出基础压力分布对基础动力反应的影响显著 ,不容忽视。
4)  elastic half-space theory
弹性半空间理论
5)  basic theory of automation
自动化基础理论
6)  vibration of foundation
基础振动
补充资料:动力设备基础勘察


动力设备基础勘察
dynamic equipment foundation investigation

  dongli shebei Jiehu kaneha动力设备基础勘察(dynamic equipmentfoundation investigation)为动力设备基础的设计所进行的专门工程地质勘察。动力设备运转时产生的振动一般有三种类型,即旋转振动、往复振动和冲击振动。高转速的设备对基础的振幅常有严格的限制,往复式振动设备可能引起共振,冲击式的设备往往引起过大的地面沉降。地基土在振动力作用下具有一定的弹性和阻尼性。有两种理论可计算基础的振动:以质量一阻尼器一弹簧为模式的质阻弹理论,以弹性半空间为模式的半空间理论。按质阻弹理论计算时,使用的地基参数是阻尼比和刚度系数;按半空间理论计算时,使用的地基参数是弹性模量和泊松比。 勘察工作的一般要求:(l)查明地基受力影响范圈内的土层,特别是对振动反映敏感的粉细砂、软土和人工土的厚度和分布范围,地下水位,有无洞穴存在等条件。对场地是否适宜作为动力设备的天然地基作出川定。(2)提供地基振动计算参数。弹性模量、泊松比可用波速法或室内、外有关试验测定。刚度系数和阻尼比,对一般中小型动力设备基础可按成熟的经验给出类比的结果;当需直接测定时,可采用单压模垂直自由振动试验、高低压模水平旋转祸合自由振动试验、模型基础强迫振动试验等。在提出计算指标时,需同时对试验条件如压模或试验基础的尺寸、底板压力等详细叙述,以便设计人员在作刚度换算时使用。
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条