说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> v.穿着,戴着;磨损,用旧 n.穿,戴;磨损
1)  wear [英][weə(r)]  [美][wɛr]
v.穿着,戴着;磨损,用旧 n.穿,戴;磨损
2)  Have on
穿着,戴着
3)  wear abrasion test machine
穿着磨损试验机
4)  wear [英][weə(r)]  [美][wɛr]
穿戴;使用;服装;磨损;耐久性
5)  adhesion [英][əd'hi:ʒn]  [美][əd'hiʒən]
粘着磨损
1.
A study on the effect of micro addition rare earth elements and chromium on adhesion behavior of boronized layer,Fe 2B phase,has been made using an MM 200 wear tester.
研究了微量稀土元素和铬对Fe2 B单相渗硼层粘着磨损特性的影响。
6)  adhesive wear
粘着磨损
1.
Results show that the wear rate of O'-Sialon-ZrO2-SiC is much less than that of stainless steel at the testing condition, and main wear mechanism of the unlubricated friction is adhesive wear.
研究表明,在实验条件下,O′-Sialon-ZrO2-SiC复合材料的磨损率远低于不锈钢的磨损率,O′-Sialon-ZrO2-SiC/不锈钢摩擦副间的磨损机制主要是粘着磨损。
2.
It is found that the wear mechanism between O '-sialon-ZrO 2-SiC composite and stainless steel is mainly of adhesive wear under dry condition.
室温干摩擦条件下,磨损机制以粘着磨损为主。
3.
It has been found that the wear mechanisms of O′ Sialon ZrO 2 SiC composite/1Cr13 steel pair were dominated by adhesive wear and abrasive wear under dry sliding, while the fluctuation of the friction coefficient was large.
结果表明:在600 ℃干摩擦条件下, O′ Sialon Zr O2 Si C 复合材料的磨损质量损失远低于1 Cr13 钢的磨损质量损失; O′ Sialon Zr O2 Si C 复合材料/1 Cr13 钢摩擦副的摩擦系数波动较大,磨损机制以粘着磨损和磨粒磨损为
补充资料:穿着
1.亦作"穿着"。 2.穿戴;装扮。 3.衣服。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条