说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 机械式冷藏集装箱
1)  mechanically refrigerated container
机械式冷藏集装箱
2)  freezing plate refrigerated container
冷板式冷藏集装箱
1.
The way of heat exchange and the temperature control in the freezing plate refrigerated containers;
冷板式冷藏集装箱换热方式与温度控制的探讨
3)  clip on type reefer container
外接冷气式冷藏集装箱
4)  refrigerated container
冷藏集装箱
1.
Applications of neural network in the fault diagnosis systems of refrigerated containers;
神经网络在冷藏集装箱故障诊断中的应用
2.
The research on the distribution of temperature field in the refrigerated container;
冷藏集装箱内部温度场分布的试验研究
3.
Development of control system software of circumstance simulation chamber for refrigerated container;
冷藏集装箱环境室监控系统软件的开发
5)  refrigerated containers
冷藏集装箱
1.
Analysis on heat leakage experiment of refrigerated containers;
冷藏集装箱漏热试验分析
2.
Development of thermal performance test facilities for refrigerated containers;
冷藏集装箱热工性能测试装置的研制
3.
The problems of weight loss of foods in refrigerated containers were researched.
对冷藏集装箱内冷藏食品的干耗问题进行了研究,从理论上分析了冷藏食品的干耗机理;并具体分析了冷藏食品本身的特性、箱内冷藏环境及外界环境三个方面的因素对冷藏集装箱内冷藏食品干耗的影响;最后提出了降低冷藏集装箱内食品干耗的一些具体措施。
6)  reefer container
冷藏集装箱
1.
Based on the CFD simulation calculation and verification of the air flow in the air-cooled reefer container holds, the air flow field variation in the holds is found out and the correct CFD calculation model and method are established.
通过对装载风冷式冷藏集装箱货舱内气流的CFD模拟计算和实例验证,了解货舱内气流流场的变化情况,确立了正确的CFD计算模型和方法;同时对目标船型货舱的送风和抽风两种通风模式从气流组织、排热效率和通风阻力等方面进行了比较分析,为集装箱船货舱通风系统的优化设计提供了依据。
2.
The basic idea behind a REFCON installation is the ability to communicate with each reefer container through the existing power line network using RMM technology.
REFCON系统采用电力网络将冷藏集装箱采样频率信号经频率解调器传到监测计算机中,单一操纵管理者通过中央计算机终端对全船冷藏集装箱状态监控。
3.
It will be used for optimization designing of reefer container cargo hold ventilation system on board and will save energy and improve ventilation efficiency for the system.
对货舱的送风和抽风两种通风模式从气流组织,排热效率和通风阻力等方面进行了比较分析,为货舱通风系统的优化设计提供依据,并应用于装运冷藏集装箱的货舱通风系统的优化设计,可使系统节能和提高通风效率。
补充资料:《国际集装箱安全公约》
      为保证集装箱的装卸、堆放和运输的安全,对集装箱结构作出统一要求的国际公约。1972年 12月1日联合国和政府间海事协商组织(简称海协,现改称国际海事组织)在日内瓦联合召开的国际集装箱安全会议上通过了《国际集装箱安全公约》。公约的主要内容包括公约的适用范围、两个附件和特定的修正程序。公约适用于国际运输中所使用的集装箱,但不包括为空运专门设计的集装箱。附件一的主要内容为集装箱试验、检查、批准和维修规则;附件二规定了集装箱结构的安全要求和试验程序。
  
  公约自1977年9月6日生效。截至1984年8月31日,公约有38个缔约国。中国于1980年 9月23日加入公约。根据公约规定的特定的修正程序,1981年4月2日通过了一项修正案,对公约的附件作了适当修改和补充,对出厂时未经批准的新集装箱的批准以及现有集装箱的首次检验日期、重新检验日期和新集装箱的首次检验日期都作了规定。修正案于1981年12月1日起生效。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条