说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 防止真空阀
1)  Anti-Vacuum Valve
防止真空阀
2)  vacuum shut-off valve
真空截止阀
1.
The vacuum shut-off valve and vacuum system for high vacuum die-casting were developed in this paper.
真空截止阀的结构及真空系统对高真空压铸生产具有非常重要的影响,是真空压铸中的一大瓶颈和难点。
3)  vacuum control check valve
真空逆止阀
4)  VCKV Vacuum Check Valve
真空止回阀
5)  VCKV Vacuum Control Check Valve
真空控制止回阀
6)  VMCV Vacuum Modulator Check Valve
真空调节器止回阀
补充资料:截止阀标准汇总(一)
标准编号
标准中文名称
标准英文名称
DL/T531-1994(2005复审)
电站高温高压截止阀、闸阀技术条件
 
GB/T11689-1989
船用法兰铸钢截止阀(四进位)
Marine cast steel flanged stop valves
GB/T12235-1989
通用阀门法兰连接钢制截止阀和升降式止回阀
General purpose industrial valves—Flanged steel globe valves and lift check valves
GB/T12233-1989
通用阀门铁制截止阀与升降式止回阀
General purpose industrial valves—Casting iron globe valves and lift check valves
GB/T1951-1984
船用低压外螺纹青铜截止阀
Marine low pressure bronze male threaded stop valves
GB/T2499-1993
船用法兰铸铁双排截止阀箱
Marine cast iron flange dual-row stop valves-case
GB/T590-1993
船用法兰铸铁截止阀
Marine cast iron flanged stop valves
GB/T594-1983
船用外螺纹锻钢截止阀
Marine forged steel male thread stop valves
GB/T584-1999
船用法兰铸钢截止阀
Marine cast steel flanged stop valves
GB/T595-1983
船用外螺纹青铜截止阀
Marine bronze male thread stop valves
GB/T587-1993
船用法兰青铜截止阀
Marine bronze flanged stop valves
JB/T7245-1994
制冷装置用截止阀
 
JB/T7747-1995
针形截止阀
 
JB/T9081-1999
空气分离设备用低温截止阀和节流阀技术条件
 
JB/T53165-1999
高压平衡截止阀 产品质量分等
 
JB/T53174-1999
截止阀 产品质量分等
 
JB/T53155-1999
空气分离设备用低温截止阀和节流阀 产品质量分等
 
JB/T8859-2004
截止阀 静压寿命试验规程
 
HG/T3215-1986
聚三氟氯乙烯塑料衬里截止阀
 
NF E29-350-2003
工业用阀.钢制球阀、球状截止阀和止回阀
(Industrial valves - Steel globe and globe stop and check valves.)
NF P43-001-2000
建筑物用阀门.建筑物中供应引用水用铜合金截止阀.试验和要求
(Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements.)
NF D36-380-2001
燃气燃烧器和燃气用具用自动截止阀的阀门检验系统
(Valve proving systems for automatic shut-off valves for gas burners and gas appliances.)
NF A84-621-2002
气焊设备.焊接、切割和相关工艺用带截止阀的速动连接
(Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes.)
NF M88-771-1975
液化烃容器装置.手动截止阀.制造.功能.试验
(LIQUEFIED HYDROCARBON INSTALLATIONS IN CONTAINERS. MANUALLY CONTROLLED STOP VALVE. CONSTRUCTION. OPERATION. TESTS.)
NF P43-002-1981
建筑物水管阀门.水表截止阀.一般技术规范
(VALVES AND TAPS FOR WATER SUPPLY IN BUILDINGS. STOP VALVES FOR METER. GENERAL TECHNICAL SPECIFICATIONS.)
BS EN 13709-2003
工业用阀.钢制球阀、球状截止阀和止回阀
(Industrial valves - Steel globe and globe stop and check valves)
BS 1552-1995
一类、二类和三类燃气用手动截止阀规范
(Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar)
BS 7461-1991
带有流量调节器、闭路开关指示、闭合位置指示器开关或气流量控制的电动自动气体截止阀规范
(Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control)
BS 1010-2-1973
给排水设施用排放旋塞和截止(旋压式)阀规范.第2部分:排放旋塞和地面上用截止阀
(Specification for draw-off taps and stopvalves for water services (screw-down pattern) - Draw-off taps and above-ground stopvalves)
BS 1873-1975
石油、石油化学及有关工业用钢球形阀、球形截止阀与单向阀(有法兰及对接焊端)规范
(Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries)
BS 3457-1973
水龙头与截止阀座垫圈材料规范
(Specification for materials for water tap and stopvalve seat washers)
DIN 4817-1-1981
液态气的截止阀.概念.安全技术要求.检验.标志
(Shut off valves for liquefied gases; definitions, requirement, testing, marking)
DIN 86251-1998
造船用铸铁制带法兰的DN15至500的截止阀
(Shutt off valves for shipboard use, of cast iron, with flanges, DN 15 to 500)
DIN 86260-1998
造船用炮铜制带法兰DN15至500的截止阀
(Shutt off valves for shipboard use, of gun metall, with flanges, DN 15 to 500)
DIN 85003-4-1997
造船用管件的交货技术条件.第4部分:截止阀
(Technical specifications for valves for shipboard use - Part 4: Stop valves)
DIN 85003-6-1997
造船用管件的交货技术条件.第6部分:手动截止阀
(Technical specifications for valves for shipboard use -Part 6: Hand operated gate valves)
DIN 3399-1986
低压截止阀.安全技术要求和检验
(Gas low-pressure cut-off valves; safety requirements, testing)
DIN 3160-1974
公称压力25的冷却剂循环直通截止阀
(Through-valves for refrigerant circuits, nominal pressure 25 bar)
DIN 3161-1974
公称压力25的冷却剂循环角形截止阀
(Elbow valves for refrigerant circuits; nominal pressure 25 bar)
DIN 4056-1992
水管.街道地下截止阀门的路盖.DVGW技术规范
(Water pipelines; valve boxes for stop valves; DVGW code of practice)
标准编号
标准中文名称
标准英文名称
DIN EN 1643-2001
燃气燃烧器和燃气用具用自动截止阀的阀门检验系统
(Valve proving systems for automatic shut-off valves for gas burners and gas appliances; German version EN 1643:2000)
DIN 86500-1968
船用螺纹连接的截止阀和闸阀等概述
(Valves and Gate Valves with Screwed Connections; Survey of Types for Shipbuilding)
DIN 86254-2000
船只及造船技术.超轻型截止阀DN32-DN125(PN10)
(Ships and marine technology - Shut off valves extra light duty DN 32 to DN 125, PN 10)
DIN EN 13709-2003
工业用阀.钢制球阀、球状截止阀和止回阀
(Industrial valves - Steel globe and globe stop and check valves; German version EN 13709:2002)
DIN EN 1213-1999
建筑阀门.建筑物中饮用水供应用铜合金截止阀.试验和要求
(Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements; German version EN 1213:1999)
DIN 86266-2002
船舶和航海技术.用手夹紧和法兰连接的超轻型法兰的截止阀
(Ships and marine technology - Butterfly valves for flanges extra light duty wafer type and flanged type - DN 50 to DN 125, PN 10)
GB/T1856-1993
船用法兰铸铁单排排出截止阀箱
Marine flanged cast iron single arrangement exhaust stop box valve
GB/T1854-1993
船用法兰铸铁单排吸入截止阀箱
Marine flanged cast iron single arrangement suction stop box valve
JIS B8605-2002
致冷装置的截止阀
(Stop valves for refrigerants)
JIS F7379-1996
造船.卡套式30K黄铜截止阀
(Shipbuilding -- Brass 30K stop valves with bite joint(s))
JIS E4103-1988
铁路车辆用截止阀
(Cut-out cocks for railway rolling stock)
JIS E4114-1989
铁路车辆用青铜截止阀
(Bronze stop valves for railway rolling stock)
QB/T3880-1999
卫生洁具、暖气直角式截止阀技术条件
Technical requirements for sanitariness ware and heating angle valve
QB/T3881-1999
卫生洁具、暖气直角式截止阀型式和尺寸
Shapes and dimensions of sanitariness ware and heating angle valve
JB/T10530-2005
氧气用截止阀
 
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条