1) coefficient quantization error
系数量化误差
2) digital system quantizing error
数字系统量化误差
3) error coefficient
误差系数
1.
Study on Calibration of SIMS Error Coefficients with Bayesian Dynamic Model;
基于贝叶斯动态模型的惯组误差系数标定方法研究
2.
Based on studying the measure- ment principles and causes of deviation of EMC,two novel methods for error coefficient solution and error compensa- tion are presented.
针对磁航向测量中存在的各种误差,分析了电子磁罗盘(EMC)系统误差的形成原因与机理,在此基础上系统地研究了在任意姿态下电子磁罗盘磁航向误差校正问题,并且具体给出了2种误差系数的求解方法以及相应的误差补偿方法。
3.
Multi factors effecting the shift of IMU error coefficients and being hard to extract are synthesized to one factor, and a certain system is assumed to cause the shift of IMU error coefficients, thereby the time sequence modeling is adopted to predict the shift of IMU error coefficients and in this way the indeterminacy in the factors analysis can be eliminated and the workload can be reduced.
将影响 IMU误差系数漂移并难于分离的多种因素综合为一种因素 ,假定 IMU误差系数的漂移由一特定系统所引起 ,从而采用时间序列建模方法进行 IMU误差系数漂移的预测。
4) quantization error
量化误差
1.
Time delay units quantization error analysis and wideband phased array digital beamforming;
时延单元量化误差分析及宽带相控阵数字波束形成
2.
The analysis of quantization error for SNR in DBF;
DBF中的量化误差对SNR影响的分析
3.
Influence of quantization errors on control quality of main steam temperature control systems of power stations;
量化误差对电厂主汽温控制品质的影响
5) quantized error
量化误差
1.
Bat the quantized errors of A/D conversion are not always equal to ±LSB/2, while the quantized error Δ U N of double integrating conversion comes from the count to clock pulse, and -1≤ Δ U N≤1 .
但是，Ａ／Ｄ转换的量化误差不都是±ＬＳＢ／２。
2.
This paper proposes an improvement architecture of distributed arithmetic-based color space converter, and analyses the quantized error of this architecture.
根据一种基于分布式算法的通用色彩空间转换方法,优化了色彩空间转换器的硬件结构,并分析了在硬件实现上的量化误差。
3.
It will have the corresponding error on the uniformity correction to the LED display monitor for the influence of quantized error and the visual function.
对 LED 显示屏进行一致性校正,由于量化误差及视觉函数修正的影响,会产生相应的误差。
6) quantizing error
量化误差
1.
Frequency measurement is usually implement by accounting the measured signals and standard signals,thus quantizing error becomes the main source of measuring error.
频率测量一般是通过对被测信号和标准信号计数实现,因此量化误差是引起测量误差的主要原因。
2.
Coning error and quantizing error are two kinds of primary errors in the attitude algorithm of laser strap-down inertial system.
圆锥误差和量化误差是激光捷联惯性导航系统姿态解算误差的两个最主要的误差源。
补充资料：系数
系数
coefficient
系数[眼伍dent;二o，中中胭”e.T] 代数表达式中的数值因子，未知数的幂前面的已知因子，或与变量相乘的常数因子，例如，单项式一(3/4)·a、，中的系数是一3/4;在方程x，+Zpx+。=0中，x，的系数是1，x的系数是ZP;在圆周长的公式卜2盯中，系数是2兀.在直线方程y=kx十b中，数k表示该直线与x轴所成之角的正切，称为角系数(胡郎比叹f-fi口cnt)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条