2) Coulomb failure stress
库仑破裂应力
1.
Numerical simulation of loading/unloading effect on Coulomb failure stress among strong earthquakes in Sichuan-Yunnan area;
川滇地区强震序列库仑破裂应力加卸载效应的数值模拟
2.
The change of Coulomb failure stress on aftershock focal depth produced by all the earthquakes before each aftershock is calculated.
5级地震后各次地震前其所在主破裂面的库仑破裂应力变化。
3.
Calculations of the change in Coulomb failure stress on aftershock failure plane reveal that 4 events among 5 large aftershocks occurred in areas with ΔCFS>0 (10~(-2)～10~(-1) MPa); There are two contrary results for one aftershock due to two different focal mechanism, this aftershock occurred in areas with ΔCFS>0 and ΔCFS<0.
7级大地震后,主震分别在5次强余震破裂面上诱发的库仑破裂应力变化(ΔCFS)。
3) Coulomb stress change
库仑应力变化
1.
Correlation between the Coulomb stress change on regional dominant faults and that on aftershock nodal planes,and its implication for earthquake prediction
区域优势构造面和余震节面库仑应力变化相关性与地震预测意义
2.
Coulomb stress changes caused by the Wenchuan earthquake are calculated and earthquake activity is evaluated using finite element method for some faults around the area.
根据汶川地震同震静态位移我们计算了周围地区一些断层的库仑应力变化,并据此评价了震后周围地区断层和地震的活动性。
4) Coulomb stress accumulation rate
库仑应力积累率
1.
We caculate Coulomb stress accumulation rate and moment accumulation rate through inversing Haiyuan fault slipping rates and locking depths by using a Fourier solution of 3D body force model with constrains of CMONOC and GPS profiles data.
用中国地壳运动观测网络区域站在海原断裂带附近的所有观测数据及跨断裂GPS剖面观测数据作为约束,用Smith3D体力模型反演了海原断裂带断层滑动速率和断层闭锁深度,计算了库仑应力积累率和地震矩积累率。
5) static Coulomb stress
静态库仑应力
1.
The contribution of postseismic relaxation to the induced Coulomb stress and its comparison with that of static Coulomb stress changes imparted by 1997 Mw 7.
计算结果表明:静态库仑应力和黏弹性库仑应力均不超过0。
6) viscoelastic Coulomb stress
黏弹性库仑应力
1.
The results show that standard deviation of combined static and viscoelastic Coulomb stress changes and their means are not larger than 0.
8地震间的静态及黏弹性库仑应力的迁移。
补充资料：连多硫酸应力腐蚀破裂
分子式：
CAS号：
性质：奥氏体不锈钢应力腐蚀破裂的一种类型。主要发生在接触高温含硫介质的化工装置中。在高温下钢表面生成硫化铁，当装置停车时温度降低，硫化铁与水分和空气相接触，反应生成连多硫酸H2SxO6(x=3，4，5)，导致不锈钢发生晶间型应力腐蚀破裂。抗晶间腐蚀性能较好的钢种，其抗连多硫酸应力腐蚀破裂的性能也较好。
CAS号：
性质：奥氏体不锈钢应力腐蚀破裂的一种类型。主要发生在接触高温含硫介质的化工装置中。在高温下钢表面生成硫化铁，当装置停车时温度降低，硫化铁与水分和空气相接触，反应生成连多硫酸H2SxO6(x=3，4，5)，导致不锈钢发生晶间型应力腐蚀破裂。抗晶间腐蚀性能较好的钢种，其抗连多硫酸应力腐蚀破裂的性能也较好。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条