说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 加载条形
1)  strip-loading
加载条形
1.
Some poled polymers have been investigated and the strip-loading
108nm,电光系数在1310nm可达50pm/V且稳定性良好,基于它的优良特性我们设计了一种加载条形波导结构,波导波导的宽度和高度分别为4μm和3μm,分支波导的间距为30μm,调制区长度为1。
2)  Strip-loading structure
加载条形结构
3)  strip-loaded waveguide
加载条形光波导
4)  strip-loading waveguide
加载条形波导
5)  loading condition
加载条件
1.
Ekonol/POM and Ekonol/G/MoS2/POM composite was prepared by blending-compressing method with torque rheometer,and the friction and wear experiment was used to investigate the tribology characteristics of the POM composite under different loading condition.
用摩擦磨损试验对转矩流变仪-模压成型方法制备的Ekonol/POM和Ekonol/G/MoS2/POM复合材料在不同加载条件下的摩擦学性能进行了研究。
2.
Dynamic modulus(E*) tests are performed on various void volume samples under the conditions of various temperatures and various loading frequencies,which are obtained from asphalt mixtures with Superpave gradation,and the changing regularity of dynamic modulus of asphalt mixtures with the volume parameters and loading condition is analyzed.
对一种Superpave级配沥青混合料不同空隙率的试样进行了不同温度、不同加载频率条件下动态模量试验,分析了混合料动态模量随体积参数、加载条件的变化规律,研究结果对我国的路面设计模量动态参数的选择具有借鉴意义。
3.
The relationships among specimen stress,incident stress,reflected stress and transmitted stress were analyzed;and the loading condition for specimen deformation at constant strain rate was found out,i.
从分析霍布金逊压杆测试中试样变形应力、入射应力、反射应力和透射应力的相互关系入手,获得满足试样恒应变率变形所需的加载条件,即只有当加载应力和试样的变形应力具有相同的变化规律时,试样变形才处于恒应变率状态。
6)  strip load
条形荷载
1.
The research for Mandaer effect of homogeneous saturation foundation Under strip load;
条形荷载下饱和均质地基曼德尔效应研究
2.
The research for Boit consolidation feature of the saturation deep soil under the strip load;
条形荷载下饱和深厚土体Biot固结性状研究
3.
This paper dedu c es the formulation for calculating later al pressure with uniform strip load base d on the solution of boussinesq.
从布辛尼斯克 (Boussinesq)解出发 ,推导了均布条形荷载作用下支护结构上的侧压力计算公式 ,并给出了计算参数表 ,利用此公式和表格进行侧压力计算 ,比较方便、简单。
补充资料:自动加载下载的*.dmt材质方法

自动加载下载的*.dmt材质方法一
1、建立如下路径的文件夹:
E:\graphiclib\graphic-library\
然后把你下载的adv_materials文件夹(里面材质了)放到刚才建立的路径里,变成如下路径
E:\graphiclib\graphic-library\adv_materials
2、如图配制搜索路径



3、这样调用!点PHOTOLUX材质库







说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条