1) rotary forging upsetting
摆辗镦粗
1.
Hence it is required to study the characteristic of plastic hinge in the process of ring rotary forging upsetting.
一旦摆辗过程中产生了塑性铰,将会在工件内部产生弯矩,引起工件内力重新分布,影响工件的塑性变形方式和残余应力分布以及材料性能,因而有必要研究环件摆辗镦粗工艺过程中的塑性铰特性。
2) rotary rolling
摆辗
1.
Study on new rotary rolling technology and die life of auto semi-axle;
汽车半轴摆辗新工艺及模具寿命研究
3) rotary forging
摆辗
1.
Rotary forging of pin parts used in rail cars and development of new rotary forging press;
铁路车辆销类件摆辗精密成形及新型摆辗机研制
2.
Application of the rotary forging technology in the solid wheel manufacturing;
摆辗技术在火车轮制造中的应用
3.
Study on rotary forging process of spiral bevel gear
螺旋锥齿轮摆辗工艺研究
4) upsetting
[英][ʌp'setɪŋ] [美][ʌp'sɛtɪŋ]
镦粗
1.
Methods and FE Simulation of Improving Quality of Upsetting;
提高自由镦粗成形质量的工艺方法与有限元模拟
2.
Compare and Analyse of Unit Deforming Force and Boundary Conditions in Model Element of Cylinder Upsetting;
圆柱体镦粗模型单元单位变形力及边界条件的比较分析
3.
Study on the law of temperature influence on brass upsetting microforming;
温度对黄铜微成形镦粗的影响规律研究
5) upset
[英][ʌp'set] [美][ʌp'sɛt]
镦粗
1.
Engineering application of the upsetting straight thread bar’s connection technique;
钢筋镦粗直螺纹技术在工程中的应用
2.
Effect of annealing temperature on microstructure and transverse ductility of upset pure Mo bars
退火温度对镦粗纯钼棒组织和横向塑性的影响
3.
The deformation extent of metal decreases from top to bottom along longitude direction during upset and changes into cylinder,accumulating deformation exists during processing,the shape phenomenon is not observed and the ove.
研究表明,正挤压时,金属在模腔中延伸变形成圆台体,受模具形状影响,变形程度从顶端向底端逐渐减小;圆台体镦粗时金属在高度方向从顶端至底端各层沿径向流动逐渐减小,依次连续变形成圆柱体。
6) rotary roll
摆辗成形
1.
Finite element analysis of maximum rolling pressure of rotary roll forming for straight tooth bevel gear;
直齿圆锥齿轮摆辗成形最大辗压力的有限元研究
补充资料：摆话
1.说话。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条