1) double hydrothermal method
二次水热
2) twice hydrothermal synthesis
二次水热合成
1.
The results show that pure NaA and NaY zeolite membranes firmly adhering to the supports can be prepared by twice hydrothermal synthesis with proper composition of precursors,on condition that the supports have been treated by alkali solution and thoroughly washed.
研究结果表明，通过对支撑体进行适当碱处理，用二次水热合成由适当组成的反应混合物可以在多孔陶瓷支撑体上合成堆积紧密的纯ＮａＡ和ＮａＹ沸石膜。
2.
Supported pure ZSM 5 zeolite membrane was prepared by twice hydrothermal synthesis.
用二次水热合成法得到了有支撑纯ＺＳＭ－５沸石膜。
3) reheating
[英][ri:'hi:t] [美][ri'hit]
二次加热
1.
Reheating Process for the Semi-solid A356 Alloy;
半固态A356合金的二次加热工艺研究
2.
Detection of the Reheating State of Semisolid Hypoeutectic Al-Si Alloy;
半固态亚共晶铝硅合金二次加热状态检测
3.
Effect of In-situ Al_2O_3 Particles on Reheating Microstructure of Near-liquidus Casting Al-Cu Alloy
原位Al_2O_3颗粒对近液相线铸造Al-Cu合金二次加热组织的影响
4) Reheat
[英][,ri:'hi:t] [美][ri'hit]
二次加热
1.
Relationship of Microstructure and Toughness Index of Reheated High Grade Pipeline Steels;
高钢级管线钢二次加热后韧性指标变化规律及其与组织关系探讨
2.
Study of reheated microstructures of semi-solid ingots of SiC_p/2024 composites;
SiC_p/2024复合材料半固态坯二次加热组织的研究
3.
Effect of reheating on toughness index and microstructure of high grade pipeline steels;
二次加热对高钢级管线钢韧性及其组织的影响
5) remelting
二次加热
1.
Using resistance furnace, the structure of A356 aluminum alloy casted by nearby liquidus semi-continuous was studied during remelting by means of electron microscope and image analysis apparatus.
利用电阻炉加热,采用电子显微镜及图象分析仪,研究了近液相线铸造A356铝合金在二次加热过程中的组织变化。
2.
The remelting temperature field of semi-solid A356 alloy was simulated using ANSYS software.
利用大型有限元分析软件,模拟计算了半固态A356铝合金的二次加热温度场·结果表明:在给定铝合金二次加热温度的前提下,线圈电流密度与加热时间成反比,与试样内、外温差大小成正比·当用总截面为40mm×130mm的宽线圈加热时,合适的线圈的电流密度为0 5×107A/m2和0 6×107A/m2,此时铝合金内外温差分别为8 6℃和9 8℃,加热时间分别为31min和21min;当用总截面为20mm×130mm的窄线圈加热时,合适的电流密度分别为0 8×107A/m2和0 85×107A/m2,此时铝合金内外温差分别为8 6℃和8 9℃,加热时间分别为33min和30min·本研究为A356合金半固态生产工业化提供理论指导
3.
The casting microstructures are gradually turned into equiaxed grains by remelting.
为了研究半固态金属的成型规律,采用电子显微镜及图像分析仪,研究了近液相线半连续铸造ZL201合金的微观组织及其在二次加热过程中的变化。
6) two-time hot pressing
二次热压
1.
Influence of two-time hot pressing on microstructure and properties of TiB_2-Cu-Ni composite via combustion synthesis;
二次热压烧结对燃烧合成TiB_2-Cu-Ni复合材料组织及性能的影响
2.
On the basis of high temperature compression, the two-time hot pressing sintering was conducted at 1050℃,1090℃ and 1150℃ .
分别在 10 5 0℃、 10 90℃、 115 0℃对复合材料进行二次热压烧结 ,详细研究了工艺参数对TiB2 4 0Cu复合材料二次热压变形、组织特征及力学性能的影响。
补充资料：十字水期韦潘侍御同年不至,时韦寓居水次故
【诗文】：
伊水溅溅相背流，朱栏画阁几人游。漆灯夜照真无数，
蜡炬晨炊竟未休。顾我有怀同大梦，期君不至更沈忧。
西园碧树今谁主，与近高窗卧听秋。
【注释】：
【出处】：
全唐诗：卷540-75
伊水溅溅相背流，朱栏画阁几人游。漆灯夜照真无数，
蜡炬晨炊竟未休。顾我有怀同大梦，期君不至更沈忧。
西园碧树今谁主，与近高窗卧听秋。
【注释】：
【出处】：
全唐诗：卷540-75
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条