1) Relative pressure loss
相对压力损失
2) relative loss
相对损失
1.
The one combines the squared error loss and the relative loss ratio is called as the relative mean square e.
基于这一点,我们提出了两种计算保费的损失函数:均方相对损失函数和熵相对损失函数,并且给出了倍度因子的估计公式及它们的性质。
3) pressure loss
压力损失
1.
Inspecting defects inside impeller of electric submersible pump by fluid pressure loss measurement method;
流体压力损失法检测电潜泵叶轮缺陷的研究
2.
Design and Calculations of the Pressure Loss of Venturi Scrubbers;
文丘里洗涤器压力损失的设计计算
3.
Computerization of pressure loss and equalization in multibrached suction pipeline;
多分支吸风管路压力损失及平衡的计算机处理
4) pressure drop
压力损失
1.
Theoretical approach to pressure drop across cyclone separators;
旋风分离器内压力损失的计算
2.
Experiment and analysis of pressure drop characteristics of flexible duct in air conditioning systems;
空调系统柔性风管压力损失特性实验与分析
3.
Effect of factors on pressure drop in the inertia separation chamber of stripper combine harvester with air suction;
气吸式割前摘脱联合收割机惯性分离室压力损失的影响因素
5) pressure losing
压力损失
1.
Taking the object of transporting carbon black,analyzed the transportation pressure losing of level pipe、vertical pipe and bend pipe of the pneumatic transportation pipe line,gained the pres-sure losing formula of the three sorts of pipe line.
对以炭黑为输送对象的气力输送管道中水平管、垂直管和弯管的输送压力损失分别进行了分析,得到了炭黑在这3种输送管道中的压力损失计算公式。
2.
The result showed the pressure losing with two times draught was slightly lower than that with no two times draught's while empty running.
对吸粮机装置中的单筒型吸嘴进行了实验研究,得出吸粮机空载运行时,有二次进风口的单筒型吸嘴压力损失略低于无二次进风口的单筒型吸嘴压力损失;重载运行时在同一风速下,有二次进风口的单筒型吸嘴输送产量高于无二次进风口的单筒型吸嘴的产量。
3.
According to pressure losing coefficient of hydraulic system parts tested by experiment, the advancing velocity of powered support was calculated under a certain condition.
通过实验室实验来确定支架液压系统各元件的压力损失系数,计算出在一定条件下的液压支架移架速度,计算结果反映了支架移架速度的实际情况,该方法现已应用于支架的液压系统设计并取得良好效果,实现快速移架系统的定量化设计。
6) pressure losses
压力损失
1.
This paper explained the cause of pressure loss formation, introduces various calculation methods for pressure losses of heat exchanger, discusses different measures to reduce pressure losses.
换热器的压力损失很重要，在设计时必须满足所给的条件，否则将影响生产的顺利进行。
2.
And all hydraulic at he process of the motive power transmission would produce pressure losses.
在工程机械、矿山机械、机械加工等设备中广泛使用液压传动,而液压在动力传动中都要产生压力损失。
3.
The software GT-POWER is used to calculate the pressure losses of three types of reactive exhaust mufflers,and the results are compared to that by software FLUENT to verify the accuracy of GT-POWER with the effects of the change in gas velocity on pressure losses analyzed.
使用GT-POWER软件计算了3种抗性消声器的压力损失,并与FLUENT软件的计算结果进行了比较以验证软件的计算精度,分析了气流流速变化对消声器压力损失的影响。
补充资料：) 污染损失法
在SEEA框架中，污染损失法是指基于损害的环境价值评估方法。这种方法借助一定的技术手段和污染损失调查，计算环境污染所带来的种种损害，如:对农产品产量、人体健康、生态服务功能等的影响，采用一定的定价技术，进行污染经济损失评估。目前定价方法主要有人力资本法、旅行费用法、支付意愿法等。与治理成本法相比，基于损害的估价方法(污染损失法)更具合理性，体现了污染的危害性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条