说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> PE管检测
1)  polyethylene (PE) pipe test
PE管检测
2)  PE virus detection
PE病毒检测
3)  PE pipe
PE管
1.
On the present situation and prospect of the application of PE pipe;
PE管应用技术发展的现状及前景分析
2.
On the application of PE pipe in urban water supply and drainage works;
浅谈PE管在城市给排水工程中的应用
3.
Application of PE pipe in Sheshan human drinking water supply project;
PE管在社山人饮工程中的应用
4)  PE pipeline
PE管道
1.
Application of PE pipeline in the gas engineering;
PE管道在煤气工程中的应用
2.
Taking the pipeline crossing by directional drilling between Xin-One station and Yun-Two gas distribution station in Shengli Oilfield as an example, this paper elucidates the technical characteristics of PE pipeline crossing construction by directional drilling as well as the technical key matters of guiding hole drilling, pipeline back-dragging and slurry quality control.
以胜利油田辛一站至营二配气站输气管道定向钻穿越工程为例,介绍了PE管道定向钻穿越施工工艺特点和穿越过程中的导向孔钻进、管道回拖、泥浆质量控制等项工序的技术要求。
3.
This paper comments on the research of PE pipeline global properties,application and fast fracture,the optimal plan of pipeline diameter which inserts PE pipeline is illustrated during repair steel pipeline, the flow parameters and pressure conditions are determined, and the fracture of PE pipeline is analyzed.
对聚乙烯(PE)管道的综合性能、使用及快速开裂的研究进行了评述,阐明了修复钢制管道中穿插PE管的管径选择方案,确定了承压能力以及套管流量参数,并就PE管道的断裂机理进行了分析。
5)  three layer PE pipe
三层PE管
1.
The production line for both three layer PE pipe and epoxy powder inner anticorrosion pipe came from the reformation of an original production line of three layer PE pipe.
三层PE管和环氧粉末内防腐管兼容生产线是在三层PE管生产线的基础上改造而成的,主要解决了如下技术问题:将常规使用的喷枪导流体改成导流嘴和枪芯两部分,以适应喷涂不同直径钢管的需要;采用双级回收装置,提高粉末回收率,改善作业环境;加大一次气喷嘴和文丘里泵喷嘴的口径,使出粉量增加20%以上,从而保证涂层喷涂的厚度;设计推枪装置,提高生产的自动化程度。
2.
This paper describes the structure,function and feature of an on-line coating inspection device for three layer PE pipe.
介绍三层PE管防腐层在线检测装置的结构、功能和特点。
6)  PE sintered tube
PE烧结管
补充资料:PE
分子式:
CAS号:

性质: 由乙烯均聚以及与少量α-烯烃共聚制得的乳白色、半透明的热塑性塑料。密度0.86~0.96g/cm3,按密度区分有低密度聚乙烯(也包括线性低密度聚乙烯)、超低密度聚乙烯(特低密度聚乙烯)、中密度聚乙烯、高密度聚乙烯等。无味、无毒。耐化学药品,常温下不溶于溶剂。耐低温,最低使用温度-70~-100℃。电绝缘性好,吸水率低。物理机械性能因密度而异。工业上低密度聚乙烯主要采用高压(110~200MPa)、高温(150~300℃)自由基聚合。其他则用低压配位聚合,有时同一套装置可生产密度0.87~0.96g/cm3的聚乙烯产品,称全密度聚乙烯工艺技术。聚乙烯可加工制成薄膜、电线电缆护套、管材、各种中空制品、注塑制品、纤维等。广泛用于农业、包装、电子电气、机械、汽车、日用杂品等方面。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条